Control of Magnetic Particle Size in Ferrofluid and Its Effect on Rheological Properties
نویسندگان
چکیده
Abstract Rheological properties are the theoretical basis and key to common problems in ferrofluid applications, therefore they expected be adjustable satisfy different technical requirements through altering microstructure of during process preparation. In this paper, Four samples with magnetic particle size were prepared by controlling concentration precursor solution co-precipitation rheological these investigated. These exhibited field-controlled properties. Eternal field would enhance formation microstructures, resulting an increase viscosity. While shear rate, microstructures tended destroyed, causing viscosity decrease. There two opposing mechanisms influence concentration. On one hand, reduction produce primary particles smaller size. But on other surfactant became insufficient completely coat because increased specific surface area, aggregate form secondary clustering structures which strongly enhanced magnetoviscous effect weakened viscoelastic effect.
منابع مشابه
effect of sub-grid scales on large eddy simulation of particle deposition in a turbulent channel flow
چکیده ندارد.
15 صفحه اولan investigation of the impact of self monitoring on langauge teachers motivational practice and its effect on learners motivation
the central purpose of this study was to conduct a case study about the role of self monitoring in teacher’s use of motivational strategies. furthermore it focused on how these strategies affected students’ motivational behavior. although many studies have been done to investigate teachers’ motivational strategies use (cheng & d?rnyei, 2007; d?rnyei & csizer, 1998; green, 2001, guilloteaux & d?...
Effect of Particle Size Distribution and Chemical Composition on Properties of Magnesia Chromite Bricks
The present study was undertaken to improve the quality and increase the life time of magnesia-chromite refractory bricks used in the copper and lead industries. The results show that a decrease in the amount of large chromite particles in the formulation improves the thermomechanical properties and also reduces the slag penetration in the bricks. In addition it was also observed that the use o...
متن کاملStudy of milling effect on particle size and mechanical properties of WC-Co composite
The effect of milling on the particle size and mechanical properties Tungsten Carbide - Cobalt composite were investigated. First, raw materials ratios by mechanical milling for 4 hours at 300 rpm were mixed. The powder in the optimum temperature 1350°C at a rate of temperature rise 50°C / min and shelf life of 4 minutes and the pressure MPa 30 were sintered in SPS. The results indicated nearly...
متن کاملStudy of milling effect on particle size and mechanical properties of WC-Co composite
The effect of milling on the particle size and mechanical properties Tungsten Carbide - Cobalt composite were investigated. First, raw materials ratios by mechanical milling for 4 hours at 300 rpm were mixed. The powder in the optimum temperature 1350°C at a rate of temperature rise 50°C / min and shelf life of 4 minutes and the pressure MPa 30 were sintered in SPS. The results indicated nearly...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Journal of Mechanical Engineering
سال: 2022
ISSN: ['1000-9345', '2192-8258']
DOI: https://doi.org/10.1186/s10033-022-00718-z