Control of Crystal Morphology for Mold Flux During High-Aluminum AHSS Continuous Casting Process
نویسندگان
چکیده
منابع مشابه
Mathematical Modeling of Heat Transfer for Steel Continuous Casting Process
Heat transfer mechanisms and the solidification process are simulated for a continuous casting machine and the geometric shape of the liquid pool is predicted considering different conditions. A heat transfer and solidification model is described for the continuous casting of steel slabs. The model has been established on the basis of the technical conditions of the slab caster in the con...
متن کاملAdaptive Mold Level Control in a Continuous Steel Slab Casting Process
Surface quality of the steel slabs in a Continuous Casting (C.C.) process is mainly determined by the stability of the Mold Level Control (MLC). Excessive mold level fluctuations lead to an additional machine scarfing process which is applied to the slabs to avoid surface defects. A conventional Proportional-Integral-Derivative (PID) controller is not robust enough to deal with the disturbances...
متن کاملApplication of fuzzy logic control for continuous casting mold level control
This paper deals with the problem of molten metal level control in continuous casting. Under normal circumstances, proportional integral derivative (PID) control performs quite well, but abnormal conditions (in particular nozzle clogging/unclogging) require manual intervention. Indeed, when the flow of matter into the mold increases suddenly, the PID controller is not always able to prevent lar...
متن کاملThermal Simulation of Solidification Process in Continuous Casting
In this study, a mathematical model is introduced to simulate the coupled heat transfer equation and Stefan condition occurring in moving boundary problems such as the solidification process in the continuous casting machines. In the continuous casting process, there exists a two-phase Stefan problem with moving boundary. The control-volume finite difference approach together with the boundary ...
متن کاملSolidification and thermal performance analysis of the low carbon steel during the continuous casting process
The present paper evaluates the effect of the nozzle characteristics on the heat transfer and phase change of the low carbon steel during the continuous casting process. A three-dimensional energy equation and a solidification model are used to drive the governing equation of the phase change and temperature distribution. A linear relation is obtained to predict the temperature-dependent of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions B
سال: 2016
ISSN: 1073-5615,1543-1916
DOI: 10.1007/s11663-016-0697-7