Control of carbide dispersion carburizing layer for steel 2.5%Cr.
نویسندگان
چکیده
منابع مشابه
Microstructural Effect on the Weldability of 25Cr-35Ni Cast Steel
The 25Cr-35Ni heat resistant steel has been widely used when resistance to oxidation and creep rapture at elevated temperatures is required. In this paper, the microstructural effect on the weldability of this alloy is investigated. The results of this study indicate that this steel has a perfect weldability in the as cast condition but does not possess good weldability in the aged condition. T...
متن کاملMicrostructural Effect on the Weldability of 25Cr-35Ni Cast Steel
The 25Cr-35Ni heat resistant steel has been widely used when resistance to oxidation and creep rapture at elevated temperatures is required. In this paper, the microstructural effect on the weldability of this alloy is investigated. The results of this study indicate that this steel has a perfect weldability in the as cast condition but does not possess good weldability in the aged condition. T...
متن کاملControl Of C/Ti Ratio in Titanium Carbide - Copper Master Alloys Produced by SHS Reactions and its Effect on the Carbide Dispersion In Liquid Copper
Titanium carbide is used as an attractive reinforcement to produce particulate metal matrix composites. One of the problems to use this carbide as a reinforcement in copper-based composites is the lack of wetability in Cu-TiC system. This property improves as the C/Ti ratio in carbide decreases. Problems to use this carbide as a reinforcement in copper-based composites is the lack of wetabiity...
متن کاملControl Of C/Ti Ratio in Titanium Carbide - Copper Master Alloys Produced by SHS Reactions and its Effect on the Carbide Dispersion In Liquid Copper
Titanium carbide is used as an attractive reinforcement to produce particulate metal matrix composites. One of the problems to use this carbide as a reinforcement in copper-based composites is the lack of wetability in Cu-TiC system. This property improves as the C/Ti ratio in carbide decreases.
Problems to use this carbide as a reinforcement in copper-based composites is the lack of wetabii...
متن کاملModeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor.
In the present work, the pyrolysis of acetylene was studied under steel vacuum carburizing conditions in a tubular flow reactor. The pyrolysis temperature ranged from 650 degrees C to 1050 degrees C. The partial pressure of acetylene in the feed mixture was 10 and 20 mbar, respectively, while the rest of the mixture consisted of nitrogen. The total pressure of the mixture was 1.6 bar. A kinetic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Science
سال: 1995
ISSN: 1881-3917,0915-5651
DOI: 10.2978/jsas.7.65