CONTROL ALTERNATIVES FOR YAW ACTUATED FORCE STEERED BOGIES
نویسندگان
چکیده
منابع مشابه
Control Alternatives for Yaw Actuated Force Steered Bogies
A new design for actively steered bogies (Simson S., 2007) has been proposed for tractive rollingstock to improve not only wheel rail wear and rolling contact fatigue but to also improve wheel rail adhesion. The new bogie design features forced steering with active yaw control of the secondary suspension. The control alternatives for the new bogie design are limited by the need for the control ...
متن کاملOpen Loop Force Control of Piezo-Actuated Stick-Slip Drives
In this paper a new method to generate forces with stick-slip micro drives is described. The forces are generated if the runner of the stick-slip drive operates against an obstacle. It is shown that the generated force can be varied selectively without additional sensors and that virtually any force between zero and a limiting force given by certain parameters can be generated. For the investig...
متن کاملActive Steering Control for Railway Bogies Based on Displacement Measurments
This paper presents an active steering control strategy that improves the performance of rail vehicles on track curves. The control scheme is developed to explore the usually symmetrical arrangement of bogie suspensions such that only simple and practical sensors are needed. The vehicle configuration and requirements of wheelset steering on curves are explained, before the detailed control desi...
متن کاملRobust roll and yaw integrated control using 4 wheel steering based on yaw moment and lateral force observers
Considering driving safety and comfort, this paper proposed a roll and yaw integrated control method utilizing four wheel steering based on disturbance observer (hereinafter DOB) and 2-degree-of-freedom (hereinafter 2DOF) control approach. Firstly, vehicle model for controller design as well as the desired roll and yaw motion were explained; then the controller design was carried out based on t...
متن کاملIndividual blade pitch for yaw control
Individual pitch control (IPC) for reducing blade loads has been investigated and proven successful in recent literature. For IPC, the multi-blade co-ordinate (MBC) transformation is used to process the blade load signals from the rotating to a stationary frame of reference. In the stationary frame of reference, the yaw error of a turbine can be appended to generate IPC actions that are able to...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IFAC Proceedings Volumes
سال: 2008
ISSN: 1474-6670
DOI: 10.3182/20080706-5-kr-1001.01400