Continuum damage mechanics based modeling of fiber reinforced concrete in tension

Tension Softening Behavior of Fiber Reinforced Concrete

The project aims to study tensile softening behavior of fiber reinforced concrete .Concrete is very much weak in tension but by addition of randomly oriented short crimped steel fibers will change the behavior from brittle to ductile. In the present work, the steel fibers were added at the volume fraction, being 0%, 0.5%, 1%, 1.5% to the normal strength concrete and high strength concrete. The ...

Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test

‌Progressive Damage Analysis of Laminated Composites using Continuum Damage Mechanics

In this paper, progressive damage and global failure of composite laminates under quasi-static, monotonic loading are investigated using 3D continuum damage mechanics. For this purpose, a finite element program has been developed using an eight-node 2D layered element including layer-wise plate theory. Damage analysis of a single orthotropic layer under various uniform in-plane and transverse l...

Stress Transfer Modeling in CNT Reinforced Composites using Continuum Mechanics (TECHNICAL NOTE)

Because of the substantial difference in stiffness between matrix and nanotube in CNT composite, the stress transfer between them controls their mechanical properties. This paper investigates the said issue, analytically and numerically, in axial load using representative volume element (RVE). The analytical model was established based on the modified Cox’s shear lag model with the use of some ...

Springback Modeling in L-bending Process Using Continuum Damage Mechanics Concept

Springback is one of the most common and important issues in metal forming area. Due to the fact that springback depends on a variety of parameters, it is hard to predict. Hence, in this paper, the effect of continuum damage mechanics (CDM) on springback was investigated based on the Lemaitre isotropic unified damage law. Swift’s hardening law was employed to describe isotropic hardening behavi...