Continuous Uniform Nickel Electroplating on Carbon Fibers
نویسندگان
چکیده
منابع مشابه
Nickel removal from electroplating industry wastewater: A bamboo activated carbon
Water is prime requirement for surviving of any living beings. The existence of surface water and groundwater sources are used for domestic, agriculture and industrial purposes in all over the world. Fresh water from both the water sources is highly contaminated in recent years because of rapid population growth, modern agriculture and industrial growth. Among them, contamination of water sour...
متن کاملTHE STUDY OF ELECTROLESS COATING OF NICKEL ON CARBON FIBERS
The continuity and thickness of the coating layer, are the most important factors in wetting properties and strength of carbon fibers. These factors are crucial in the quality of metal matrix composites made with carbon fibers. In this research the Polyacrylonitrail base carbon fibers have been nickel coated with 0.2, 0.5, 0.8 and 11 ,u in thickness, by the electroless method. The effect of the...
متن کامل' Pit - Free Nickel Electroplating
he wide use of nickel coatings is T due to their valuable properties.l-2 Nickel coatings are used primarily for decorative and industrial purposes. The uses of nickel in the decorative field are. numerous including automobile parts, fumiture, general hardware and fasteners, bicycles, as undercoats in low-cost jewelry, sporting equipment, toys, cutlery, lamps and plumbing fixtures. Most of the d...
متن کاملNickel electroplating for nanostructure mold fabrication.
We demonstrated a practical process of fabricating nickel molds for nanoimprinting. Dual-side polished glass is chosen as the substrate on which nickel nanostructures are successfully electroplated. Photonic crystal structures with 242 nm diameters and other nanoscale pillars down to 9 nm diameters are achieved over a large area. The electroplating parameters are investigated and optimized. Thi...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1974
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.38.9_788