Continuous Devulcanization by Shear Flow Stage Reaction Control Technology for Rubber Recycling. Part 8. Devulcanization Condition for Peroxide-Crosslinked EPDM and Mechanical Properties of Sulfur-Crosslinked Reclaimed Rubber.
نویسندگان
چکیده
منابع مشابه
Best practice for the devulcanization of sulfur-cured SBR rubber
In the present paper, special attention will be devoted to thermo-chemical devulcanization of sulfur-cured styrene butadiene rubber (SBR) using diphenyldisulfide (DPDS) as devulcanization aid. SBR is the main component in whole passenger car tire rubber and, at the same time, the most critical one in terms of devulcanization. This study is the first step to realize an effective devulcanization ...
متن کاملUpscaling of a Batch De-Vulcanization Process for Ground Car Tire Rubber to a Continuous Process in a Twin Screw Extruder
As a means to decrease the amount of waste tires and to re-use tire rubber for new tires, devulcanization of ground passenger car tires is a promising process. Being an established process for NR and EPDM, earlier work has shown that for ground passenger car tire rubber with a relatively high amount of SBR, a devulcanization process can be formulated, as well. This was proven for a laboratory-s...
متن کاملprogesterone release from electron beam crosslinked silicone rubber and study of its mechanical properties
modification of the mechanical properties of silicone rubber were considered for drug delivery systems by using high-energy electron beam (e-beam). in this research work, two different medical grades of silicone rubbers were used to prepare matrices containing 10wt% progesterone with 2 mm thickness and irradiated with e-beam at dose range of 25 up to 200 kgy. then, the mechanical properties as ...
متن کاملMechanochemical Recycling and Processing of Waste Crosslinked Polymers: Waste Tire Rubber and Waste Xlpe from Cable Scraps
The accumulation and disposal of polymer wastes including waste plastics, waste rubber, waste synthetic fibers and waste composites is a worldwide concern. Until now, there are many technical barriers in recycling polymer wastes with crosslinked structure, such as vulcanized rubber, crosslinked polyolefine and other thermoset materials. In this study, a mechanochemical approach was used to cond...
متن کاملEffect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber
A novel mixing approach for achieving a good dispersion of multi-walled carbon nanotubes (MWCNTs) in ethylene- propylene diene monomer (EPDM) matrix has been investigated. In this approach EPDM was modified with vinyltrimethoxysilane (VTMS) during melt mixing. In addition the effect of MWCNT concentration on mechanical and rheological properties of modified EPDM has been studied. The formulated...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON GOMU KYOKAISHI
سال: 2000
ISSN: 1884-0442,0029-022X
DOI: 10.2324/gomu.73.612