Continuous copper leaching technology
نویسندگان
چکیده
The parameters of the continuous technological process leaching copper from fine waste using nitric acid as an oxidizer are studied. Optimal conditions for a were established, in which solutions with mass concentration ions greater than 25 g/dm3 obtained.
منابع مشابه
Recovery of Copper from Copper Slag and Copper Slag Flotation Tailings by Oxidative Leaching
Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...
متن کاملThermophilic iron-oxidizing bacteria found in copper leaching dumps.
Rod-shaped bacteria capable of oxidizing ferrous iron at 55 degrees C were cultured from samples of a copper mine leach dump. Yeast extract or cysteine was required by these Thiobacillus-like bacteria for growth, using ferrous iron as an energy source.
متن کاملBacterial leaching of discarded copper ores from Yongping, China
The elementary and phase analysis of discarded copper ores from Yongping of China has been performed. The experiments of extracting copper from the discarded copper ores were done with the mixed bacteria obtained through a series of enrichment, separation, domestication and combination tests. The results show that in the process of bioleaching, the pH value rises at first and drops gradually. T...
متن کاملLeaching of chromated copper arsenate wood preservatives: a review.
Recent studies have generated conflicting data regarding the bioaccumulation and toxicity of leachates from preservative-treated wood. Due to the scale of the wood preserving industry, timber treated with the most common preservative, chromated copper arsenate (CCA), may form a significant source of metals in the aquatic environment. The existing literature on leaching of CCA is reviewed, and t...
متن کاملExtraction of Tin and Copper by Acid Leaching of PCBs
Printed circuit board (PCB) waste is generally dumped as a landfilling or treated pyrometallurg ically, which consumes enormous power, generates hazardous gases and also destroys valuable PCB components. For recycling of the components, they must be separated from the printed circuit boards which is a cumbersome task. For its simplification, the rate of d issolution of solder with acids like Hy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chimica techno acta
سال: 2021
ISSN: ['2411-1414', '2409-5613']
DOI: https://doi.org/10.15826/chimtech.2021.8.1.09