Continuous Carbon Dioxide Electroreduction to Concentrated Multi-carbon Products Using a Membrane Electrode Assembly
نویسندگان
چکیده
منابع مشابه
The Electroreduction of Carbon Dioxide on Porous Copper Nanoparticles
Copper nanoparticles of porous, controlled structure were synthesized using the sacrificial support method (SSM). The precursor weight percent (wt%) of copper (Cu) and fumed silica (EH-5) was varied to determine the optimum ratio for this material. The precursors were reduced at i) 350°C in a 7% H2 atmosphere and ii) at 250°C in a 100% H2 atmosphere. The specific surface areas of the nanopartic...
متن کاملContinuous Esterification in Supercritical Carbon Dioxide
Heterogeneous esterification of 2-ethyl-1-hexanol and 2-ethyl hexanoic acid using AMBERLYST 15 as solid acid-catalyst in supercritical carbon dioxide (SC-CO2) has been studied. Effect of pressure (150, 200, and 250 bar), temperature (75, 110, and 140 C), flow rate of liquid CO2 (0.4, 0.6, and 0.8 mL.min), type of sample collection, and mole ratio of alcohol to acid (2:1, 1:1, and 1:2) on ester ...
متن کاملContinuous Synthesis of Oleyl Oleate in Supercritical Carbon Dioxide using Solid p-Toluenesulfonic Acid as Catalyst
Supercritical carbon dioxide (SC-CO2) was used as solvent to synthesize oleyl oleate as an analog of Jojoba oil from oleic acid and oleyl alcohol with high conversion (100%) of the acid into ester in a short time of 100 min. Utilizing a low cost solid catalyst, p-toluenesulfonic acid monohydrate (PTSA), the esterification reaction was performed, without any prior preparation step...
متن کاملElectrochemical Sensor for Determination of Fenitrothion at Multi-wall Carbon Nanotubes Modified Glassy Carbon Electrode
A sensor, based on multi-wall carbon nanotubes modified glassy carbon electrode (MWCNT/GCE), was developed for determination of fenitrothion. Determining the surface area of MWCNT/GCE showed that this surface is three times more active than that of a glassy carbon electrode. The experimental parameters, such as the amount of MWCNTs, pH of the fenitrothion solution, preconcentration potential an...
متن کاملSeparation and Fixation of Carbon Dioxide Using Polymeric Membrane Contactor
Polypropylene hollow fiber membrane (PPHFM) contactor, with aqueous solution absorbent such as sodium hydroxide (NaOH), monoethanolamine (MEA) and diethanolamine (DEA), was designed and used to separate and fix CO2 from CO2/N2 gas mixtures. The factors that influence the separation properties of CO2/N2 were investigated. It was found that the CO2 removal efficiency is the best by using MEA solu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Joule
سال: 2019
ISSN: 2542-4351
DOI: 10.1016/j.joule.2019.07.021