Contact Force Measurement in an Operational Thrust Bearing using PVDF Film at the Blade and Pad Passing Frequencies
نویسندگان
چکیده
منابع مشابه
Measurement of Pressure Fluctuations inside a Model Thrust Bearing Using PVDF Sensors
Thrust bearings play a vital role in propulsion systems. They rely on a thin layer of oil being trapped between rotating surfaces to produce a low friction interface. The "quality" of this bearing affects many things from noise transmission to the ultimate catastrophic failure of the bearing itself. As a result, the direct measure of the forces and vibrations within the oil filled interface wou...
متن کاملA Thermal Elastohydrodynamic Lubricated Thrust Bearing Contact Model
A fully-coupled thermoelastic model for a fixed pad thrust bearing has been developed. Pressure, film thickness and three-dimensional temperature profiles were obtained by simultaneously solving the Reynolds, film thickness, energy and force balance equations using a combined finite difference and finite element method. The elastic deformation due to the pressure and the thermal distortion due ...
متن کاملThe Effect of Damping and Stiffness of Bearing on the Natural Frequencies of Rotor-bearing System
In this paper, the effectiveness of stiffness and damping of bearing is investigated on the natural frequencies of the rotor-bearing system. The rotor-bearing system consists of a shaft, two bearings and a disk between two bearings. Parallel spring-damper in horizental and vertical directions is considered for modeling the stiffness and damping of bearings. The gyroscopic effect is also conside...
متن کاملInfluence Research of Cavity Shapes on Temperature Field of Multi- pad Hydrostatic Thrust Bearing
In order to compute the thermal deformation of the hydrostatic thrust bearing in the heavy type CNC equipments, a numerical research concerning temperature field of multi-pad hydrostatic thrust bearing having sector cavity, rectangular cavity, Ishaped cavity and ellipse cavity is described. Three-dimensional temperature field of gap fluid between the rotation worktable and the base has been sim...
متن کاملProposal Performance Measurement of ATSP Coating and Bulk PEEK Faced Tilting - Pad Thrust Bearings
Background: Under severe operating conditions, such as lubricant contamination, elevated temperatures and high unit loads, the hydrodynamic (HD) lubrication condition in a HD bearing may degrade and be reduced to mixed and boundary lubrication conditions, which traditional pad bearing materials (Babbitt metal) are not able to sustain. For example, Electrical Submersible Pump (ESP) systems are r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2018
ISSN: 1424-8220
DOI: 10.3390/s18113956