Constructal entransy dissipation rate minimization for a heat generating volume cooled by forced convection
نویسندگان
چکیده
منابع مشابه
Constructal Optimizations for Heat and Mass Transfers Based on the Entransy Dissipation Extremum Principle, Performed at the Naval University of Engineering: A Review
Combining entransy theory with constructal theory, this mini-review paper summarizes the constructal optimization work of heat conduction, convective heat transfer, and mass transfer problems during the authors’ working time in the Naval University of Engineering. The entransy dissipation extremum principle (EDEP) is applied in constructal optimizations, and this paper is divided into three par...
متن کاملConstructal design of tree-shaped conductive pathways for cooling a heat generating volume
Constructal design is used to study heat removal from a square heated body with a tree shaped high thermal conductivity pathways embedded in the body. The objective is to minimize the defined maximum dimensionless temperature difference for the body. The thermal conductivity of the body is low, and there is a uniform heat generation on it. The volume of the body is fixed. The amount of high con...
متن کاملMinimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger
Improving heat transfer and performance in a radial, finned, shell and tube heat exchanger is studied in this study. According to the second law of thermodynamics, the most irreversibilities of convective heat transfer processes are due to fluid friction and heat transfer via finite temperature difference. Entransy dissipations are due to the irreversibilities of convective heat transfer. There...
متن کاملHeat Transfer Study of Perforated Fin under Forced Convection
Fins are protrusions on a heat transfer surface to augment heat transfer rate from it. The increase in area exposed to convection in case of finned surfaces results in increased heat transfer rate. In this study heat transfer characteristics of a pin fin with perforation is numerically analyzed. A pin fin is fabricated and experiments are done under forced convection conditions. The experimenta...
متن کاملAnalysis of variance of nanofluid heat transfer data for forced convection in horizontal spirally coiled tubes
In the present study, an experimental study is carried out to investigate the effect of adding Al and Cu nanoparticles to the base fluid (water) on the heat transfer rate in a spirally coiled tube. The spirally coiled tube is fabricated from the straight copper tube with the inner and outer coil diameters of 100 and 420 mm, respectively. The experiments have been done for water and two types of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Science Bulletin
سال: 2011
ISSN: 1001-6538,1861-9541
DOI: 10.1007/s11434-011-4659-9