Constructal alkaline membrane fuel cell (AMFC) design
نویسندگان
چکیده
منابع مشابه
Poly (Ether Ether Ketone) Based Anion Exchange Membrane for Solid Alkaline Fuel Cell: A Review
Solid alkaline fuel cell is employed by polymer anion exchange membrane (AEM) that is permeable to hydroxide ion. A number of polymers have been proposed for AEM which include polysulfone (PSF), poly (phenylene oxide) (PPO), and poly (ether ether ketone) (PEEK). The purpose of this paper was to conduct a critical review on the development of PEEK polymer as AEM, particu...
متن کاملA high-performance alkaline exchange membrane direct formate fuel cell
This paper reports on a single alkaline exchange membrane direct formate fuel cell (AEM DFFC) consisting of a carbon-supported palladium catalyst at the anode, a quaternized polysulfone membrane, and a non-precious Fe–Co catalyst at the cathode. It is demonstrated that the AEM DFFC yields a peak power density of 130 mW cm 2 with 5 M potassium formate (HCOOK) at 80 C. It is further shown that wi...
متن کاملTransient investigation of passive alkaline membrane direct methanol fuel cell
Passive direct methanol fuel cell (DMFC) is considered as an attractive power source for portable devices. In this study, a transient multiphase model for passive alkaline anion exchange membrane DMFC (AAEMDMFC) is developed. The results show that the power density decreases during the operation and is more difficult to maintain stable with higher current density or lower voltage. The fuel effi...
متن کاملA Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System
In the presented research, heat transfer of a mobile electrolyte alkaline fuel cell (AFC) (which the electrolyte has cooling role of system) has been considered. Proper control volumes of system with specific qualification have been chosen. Consequently, heat and mass transfer in control volumes have been assessed. Considerations on them and contributed models lead to approve a double tube heat...
متن کاملEvaluation of an Alkaline Fuel Cell for Multi- Fuel System
The performance of an alkaline fuel cell is investigated using three different fuels, e g., methanol, ethanol and sodium borohydride. Pt/C/Ni was used as anode whereas Mn/C/Ni was used as standard (Electro-Chem-Technic, UK) cathode for all the fuels. Thus, the alkaline fuel cell is used for multi-fuel system. Fresh mixture of electrolyte, potassium hydroxide (5M), and fuel (2M) was fed to and w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Heat and Technology
سال: 2016
ISSN: 0392-8764
DOI: 10.18280/ijht.34s116