Consideration of Energy Storage Circuits for Magnetic Energy Harvesting
نویسندگان
چکیده
منابع مشابه
Superconducting magnetic energy storage
A Superconducting Magnetic Energy Storage (SMES) system stores energy in a superconducting coil in the form of a magnetic field. The magnetic field is created with the flow of a direct current (DC) through the coil. To maintain the system charged, the coil must be cooled adequately (to a “cryogenic” temperature) so as to manifest its superconducting properties – no resistance to the flow of cur...
متن کاملDesign of impedance matching circuits for RF energy harvesting systems
This paper presents a systematic design methodology for impedance matching circuits of an RF energy harvester to maximize the harvested energy for a range of input power levels with known distribution. Design of input matching networks for RF rectifier differs from those for traditional RF circuits such as low-noise amplifier because the transistors in the RF rectifiers operate in different reg...
متن کامل9-5 AC Power Supply Circuits for Energy Harvesting
Passive energy harvesting from mechanical vibration has wide application in wearable and embedded sensors to complement or replace batteries. Energy harvesting efficiency can be increased by eliminating AC/DC conversion. A test chip demonstrating self-timing, power-on-reset circuitry, and memory for energy harvesting AC voltages has been designed in 180 nm CMOS and tested. Circuit operation is ...
متن کاملResilience Enhancement of Active Distribution Networks Via Mobile Energy Storage Systems and Protection Coordination Consideration
Owing to the portability and flexibility of mobile energy storage systems (MESSs), they seem to be a promising solution to improve the resilience of the distribution system (DS). So, this paper presents a rolling optimization mechanism for dispatching MESSs and other resources in microgrids in case of a natural disaster occurrence. The proposed mechanism aims to minimize the total system cost b...
متن کاملDesign and Implementation of Ambient RF Energy Harvesting Circuits
This paper presents design strategies and measurements of two RF energy harvesting circuits working at UHF frequencies (around 480 MHz). Ambient RF sources are considered so for the circuit designs low power levels have been assumed. The circuits were implemented and the RF/DC conversion efficiency was measured. Index Terms – Matching network, RF energy harvesting, schottky diode, voltage doubler.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Applied Electromagnetics and Mechanics
سال: 2013
ISSN: 0919-4452,2187-9257
DOI: 10.14243/jsaem.21.308