Connective Tissues: The Natural Fibre-Reinforced Composite Material
نویسندگان
چکیده
منابع مشابه
Machining of Fibre Reinforced Plastic Composite Materials
Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and m...
متن کاملNatural Fibre Reinforced Biodegradable Polymer Composites
Currently, numerous research groups have explored the production and properties of biocomposites where the polymer matrices are derived from renewable resources such as poly lactide (PLA), thermoplastic starch (TPS), cellulose and polyhydroxyalkanoates (PHAs). This review is carried out to evaluate the development and properties of natural fibre reinforced biodegradable polymer composites. They...
متن کاملTooth Replacement Using Natural Tooth Pontic with Fibre Reinforced Composite: A Conservative Approach
With advances in material science and technology multitude of treatment options are available for traumatically missing anterior tooth. It can be implants, porcelain to metal bridges, Maryland bridges or orthodontic treatment. Development of fibre-reinforced composites (FRCs) has opened a new perspective in such cases. The fibre-reinforced composites have better flexural strength and fracture r...
متن کاملExperimental data on the properties of natural fiber particle reinforced polymer composite material
This paper presents an experimental study on the development of polymer bio-composites. The powdered coconut shell, walnut shells and Rice husk are used as reinforcements with bio epoxy resin to form hybrid composite specimens. The fiber compositions in each specimen are 1:1 while the resin and hardener composition 10:1 respectively. The fabricated composites were tested as per ASTM standards t...
متن کاملFrictional heating in a unidirectional fibre-reinforced ceramic composite
Holmes and Shuler [1] recently found that significant internal heating occurs during the cyclic loading of fibre-reinforced ceramics. In their investigation, conducted with cross-ply carbon fibre/SiC matrix composites (hereafter referred to as Cf/SiC), it was observed that the extent of internal heating was strongly influenced by the peak fatigue stress and loading frequency. For example, durin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Royal Society of Medicine
سال: 1983
ISSN: 0141-0768,1758-1095
DOI: 10.1177/014107688307601201