Conductivity and Electrochemistry of Cobalt (II) and Dysprosium Chloride in Zinc Chloride-1-Ethyl-3-Methyl-Imidazolium Chloride Room-Temperature Molten Salt

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Conductivity, Electrodeposition and Magnetic Property of Cobalt(II) and Dysprosium Chloride in Zinc Chloride-1-Ethyl-3-Methylimidazolium Chloride Room Temperature Molten Salt

Electric conductivity of the molten zinc chloride-1-ethyl-3-methylimidazolium chloride phases has been measured by a computerized system using the d.c. four-probes method. The sequence of the conductivities for the different component melts is ZnCl2-EMIC > ZnCl2-EMIC-CoCl2 > ZnCl2EMIC-DyCl3 > ZnCl2-EMIC-CoCl2-DyCl3. The results may be explained in terms of the viscosity increase due to the comp...

متن کامل

Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid

The decomposition of the Ethiopian Kenticha tantalite ore was studied using the KOH fusion and H2O leaching system at 400 0C for a 1 h reaction time. The experimental results obtained showed that 27 wt% of Ta2O5 was mainly transformed into insoluble KTaO3, not to be KNbO3, and as well, into the dissolved liquor containing 94.73 vol% of Nb2O5 and 75.80 vol% of Ta2O5. The observations, supported ...

متن کامل

XAFS STUDIES OF Ni, Ta AND Nb CHLORIDES IN THE IONIC LIQUID 1-ETHYL-3- METHYL IMIDAZOLIUM CHLORIDE / ALUMINUM CHLORIDE

The structure of anhydrous nickel, niobium and tantalum metal chlorides in ionic liquids IL) is important in the development of new electrochemical alloy deposition techniques. In order to understand the interactions of these metal ions with ionic liquids, we have investigated their structures in situ with X-ray Absorption Spectroscopy (XAS). The ionic liquid used in this study is 1-methyl-3-et...

متن کامل

Electrodeposition of Zinc From Low Temperature Molten Salt Electrolyte: Part I-Imidazole And Zinc-Chloride Electrolyte

Our R & D work was focused on the electro deposition of Zinc from imidazole as low temperature molten salt (LTMS) electrolyte with zinc chloride as a supporting salt at <100o C., without required controls from the previous existing non aqueous baths as well additive free system for the zinc deposition. Surface morphological studies and crystallographic orientation results were evaluated.

متن کامل

Nonanomalous Electrodeposition of Zinc-Iron Alloys in an Acidic Zinc Chloride-1-ethyl-3-methylimidazolium Chloride Ionic Liquid

The electrodeposition of iron and Zn-Fe alloys on polycrystalline nickel was investigated in the 40.0-60.0 mol % zinc chloride1-ethyl-3-methylimidazolium chloride ionic liquid containing iron~II! at 90°C. Iron~II! was electrochemically reduced to iron metal before the reduction of zinc~II! to zinc metal, and anomalous codeposition of Zn-Fe did not occur in this ionic liquid. Underpotential depo...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: ECS Proceedings Volumes

سال: 2002

ISSN: 0161-6374,2576-1579

DOI: 10.1149/200219.0690pv