Condensation heat transfer in square, triangular, and semi-circular mini-channels
نویسندگان
چکیده
منابع مشابه
Condensation heat transfer in square, triangular, and semi-circular mini-channels
0017-9310/$ see front matter 2011 Elsevier Ltd. A doi:10.1016/j.ijheatmasstransfer.2011.09.002 ⇑ Corresponding author. Address: JEC 2049 2nd Institute, 110 8th St., Troy, NY 12180, United States. +1 518 276 6025. E-mail address: [email protected] (M.K. Jensen). Condensation heat transfer coefficients in mini-channels were measured with smaller measurement uncertainties than previously obtained usi...
متن کاملTheoretical model for local heat transfer coefficient for annular flow boiling in circular mini/micro-channels
Article history: Received 15 October 2013 Received in revised form 19 February 2014 Accepted 20 February 2014 Available online 19 March 2014
متن کاملNumerical simulation of nanofluids flow and heat transfer through isosceles triangular channels
Nanofluids are stable suspensions of nanoparticles in conventional heat transfer fluids (base fluids) that exhibit better thermal characteristics compared to those of the base fluids. It is important to clarify various aspects of nanofluids behavior. In order to identify the thermal and hydrodynamic behavior of nanofluids flowing through non-circular ducts, in the present study the laminar flow...
متن کاملSimulation of Convective Heat Transfer and Pressure Drop in Laminar Flow of Al2O3/water and CuO/water Nanofluids Through Square and Triangular Cross-Sectional Ducts
In this study, the convective heat transfer and pressure drop in laminar flow of Al2O3/water and CuO/water nanofluids through square and triangular cross-sectional ducts have been numerically investigated using new technique. It has been assumed that there is constant heat flux boundary condition at walls. In addition, to include the presence of nanoparticles, the dispersion model has been used...
متن کاملFlow condensation in parallel micro-channels – Part 2: Heat transfer results and correlation technique
This second part of a two-part study concerns heat transfer characteristics for FC-72 condensing along parallel, square micro-channels with a hydraulic diameter of 1 mm, which were formed in the top surface of a solid copper plate. Heat from the condensing flow was rejected to a counter flow of water through channels brazed to the underside of the copper plate. The FC-72 condensation heat trans...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Heat and Mass Transfer
سال: 2012
ISSN: 0017-9310
DOI: 10.1016/j.ijheatmasstransfer.2011.09.002