Concrete-to-concrete shear friction behavior under cyclic loading
نویسندگان
چکیده
The main objective of this paper was to study the concrete-to-concrete shear friction behavior under cyclic loading and different test rates. Eight dynamic push-pull tests were performed on concrete specimens with as-cast surface roughness type applying four results include hysteresis loops force-displacement relations. It is concluded that coefficient decreased increased rate. This reduction in should be considered design structural elements or loading.
منابع مشابه
Substructure Model for Concrete Behavior Simulation under Cyclic Multiaxial Loading
This paper proposes a framework for the constitutive model based on the semi-micromechanical aspects of plasticity, including damage progress for simulating behavior of concrete under multiaxial loading. This model is aimed to be used in plastic and fracture analysis of both regular and reinforced concrete structures, for the framework of sample plane crack approach. This model uses multilamina...
متن کاملConcrete Filled Tubular Bracing Subjected to Cyclic Loading
The energy absorption of concrete filled, hollow-steel bracing was analyzed respect to geometric and mechanical parameters including the width-to-thickness section ratio, slenderness level, and strength of the steel and concrete. Local buckling and ductility were also investigated with respect to variation in the cross-section. The infill increased the compression resistance, even after multipl...
متن کاملShear and Flexural Stiffnesses of Reinforced Concrete Shear Walls Subjected to Cyclic Loading
Seismic analyses of concrete structures under maximum-considered earthquakes require the use of reduced stiffness accounting for cracks and degraded materials. Structural walls, different to other flexural dominated components, are sensitive to both shear and flexural stiffness degradations. Adoption of the gross shear stiffness for walls in seismic analysis prevails particularly for the design...
متن کاملBehaviour of Reinforced Fibrous Concrete Beams under Reversed Cyclic Loading
When earthquakes occur, energy released by the earthquake gets induced into the structure as ground motion and this energy has to be dissipated for safety reasons. To release seismic energy, the structure should damage in such a way that on one hand, collapse of structure should not occur and on the other hand, after the earthquake, damage should be economically feasible to repair. To avoid the...
متن کاملinvestigation on diagonal reinforced concrete shear walls behavior under cyclic lateral load using finite element method
buildings with wall or frame-wall systems are more effective against earthquake forces and sustain less damage than buildings which their lateral resistance is solely depends on frames. four reinforced concrete (rc) structural wall specimens were subjected to cyclic loading using finite elements method with abaqus software in order to study influence of diagonal web reinforcement. the research ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2022
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202234701001