Concrete cover tensile capacity of corroded reinforced concrete
نویسندگان
چکیده
منابع مشابه
Modelling the loss of steel-concrete bonds in corroded reinforced concrete beams
The existing stochastic models for deterioration of reinforced concrete structures is extended by adding modelling of “loss of bond” due to corrosion between the reinforcement bars and the surrounding concrete.
متن کاملCracking of Concrete Cover in Frp Reinforced Concrete Elements under Thermal Loads
Synopsis: The effects of thermal loads on the structural performance of FRP reinforced concrete elements are analyzed in this paper. The difference in transverse coefficient of thermal expansion (CTE) between FRP and concrete causes the presence of tensile stresses within the concrete and, eventually, the formation of cracks when the temperature increases. As part of an inter-university experim...
متن کاملEffect of PET Wrapping on Shear Performance of Corroded Reinforced Concrete Columns
In this paper, an experimental study is presented on the influence of PET warping on shear performance, such as diagonal shear cracking load, peak load, and energy dissipation of RC columns with stirrup corrosion before strengthening. The experimental program involved an electrochemical process to accelerate the migration of chlorides from an external electrolyte into the tested columns, a wett...
متن کاملPrediction of Corrosion-Induced Crack Width of Corroded Reinforced Concrete Structures
This paper presents an experimental investigation on the crack width induced by the corrosion of reinforcing steel bars in concrete. Reinforcing steel bars with different diameters were corroded using an accelerated test in three types of concrete members, including 24 beams with corroded stirrup and 20 beams with corroded longitudinal reinforcing steel bars. The corrosion patterns and rusts ch...
متن کاملDevelopment of Shear Capacity Equations for Rectangular Reinforced Concrete Beams
The problem of shear is not yet fully understood due to involvement of number of parameters. Designers are extra careful about shear, especially in beams and consequently higher safety factors are used in shear design. Several equations are available in literature to determine the shear capacity of beams, i.e. ACI equation, Zsutty equation and KIM & White equation. To verify the application of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction and Building Materials
سال: 2017
ISSN: 0950-0618
DOI: 10.1016/j.conbuildmat.2017.01.021