Concise Chemistry of Urea Formaldehyde Resins and Formaldehyde Emission
نویسندگان
چکیده
منابع مشابه
Urea-formaldehyde Adhesive Resins*
Approximately 1 million metric tons of urea-formal-dehyde resin are produced annually. More than 70% of this urea-formaldehyde resin is used by the forest products in-*This information was written and prepared by a U.S. Government employee on official time and it is, therefore, in the public domain and not subject to copyright.
متن کاملLiquefied Wood as a Partial Substitute of Melamine-urea- Formaldehyde and Urea-formaldehyde Resins
Maritime pine (Pinus pinaster) sawdust was used to produce liquefied wood by the polyhydric method with acid catalysis. The process was optimized to produce the highest amount of liquefied wood. Wood liquefied at 160oC for 90 min was used in the adhesion tests. The bond strength of veneer glued with ureaformaldehyde and melamine-urea-formaldehyde resins and several mixtures of liquefied wood wi...
متن کاملDevelopment of melamine modified urea formaldehyde resins based on strong acidic pH catalyzed urea formaldehyde polymer
To upgrade the performance of urea-formaldehyde (UF) resin bonded particleboards, melamine modified urea-formaldehyde (MUF) resins based on strong acidic pH catalyzed UF polymers were investigated. The study was conducted in a series of two experiments: 1) formulation of MUF resins based on a UF polymer catalyzed with strong acidic pH and 2) determination of the effects of increased melamine co...
متن کاملWetting Behaviors of Phenol- and Urea-formaldehyde Resins as Compatibilizers
Understanding wetting behavior and surface coverage of resins on a wood surface is important to obtain satisfactory adhesion and optimize adhesive application for wood composite manufacturing. Sessile and micro-droplets of ureaand phenol-formaldehyde (UF and PF) resins were generated on wood surfaces to observe wetting behaviors using three directional image generation system and atomic force m...
متن کاملstudying thermal behavior and formaldehyde emission of modified urea formaldehyde resin by furfural
there are adequate sources for wood adhesives, but scarcity of oil resources can affect the cost and future availability of oil based resins. for avoiding of this process, seeking for feasibility of replacement of these oil feedstocks is necessary. in present work, thermal behavior of urea formaldehyde resin modified by furfural was investigated. the thermo-gravimetry was used for this purpose,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Insights in Chemistry and Biochemistry
سال: 2020
ISSN: 2694-1708
DOI: 10.33552/icbc.2020.01.000507