Conceptional design of a heavy ion linac injector for HIRFL-CSRm

MonPS09 Heavy ion injector based on ECR ion source for RISP linac

An Injector for a Multi Ion Beam Driver Linac

An advanced facility for the production of exotic shortlived isotopes far from stability (RIA) could use as the driver a high power cw superconducting linac [1]. Due to the wide range of particle velocities ( =0:019-0:81), different cavity types are required. This paper describes a possible design for the injector portion (up to =0:1) of the driver linac. The proposed injector design consists o...

Induction Linac Drivers for Heavy Ion Fusion*

The Heavy Ion Fusion Accelerator Research (HIFAR) program of the USDOE has for several years concentrated on developing linear induction accelerators as Inertial Fusion (IF) drivers. This accelerator technology is suitable for the IF application because it is readily capable of accelerating short, intense pulses of charged particles with good electrical efficiency. The principal technical diffi...

Rf Design for the Linac Coherent Light Source (lcls) Injector*

The Linac Coherent Light Source (LCLS) will be the world’s first x-ray free electron laser, and the successful operation of this very shortwavelength FEL will require excellent beam quality from its electron source. Therefore a critical component is the RF photocathode injector. This paper describes the design issues of the LCLS RF gun and accelerator structures. The injector consists of a 1.6 ...

High Intensity Heavy Ion Injector T-5010

The newly developed 10 mA, 50 keV heavy ion injector T-5010 is intended for use in isotope separators, ion implanters as well as autonomously for researches in the physics and technology of ion sources. It is complete with power supply, control, vacuum and cooling system. The injector layout is shown in Figure 1. The Freeman type ion source with four-electrode accel/decel system is set on the v...