Concentration and angular velocity measurement in a cyclone separator dipleg using electrical capacitance tomography

Mass Flow Measurement of Biofuels using Electrical Capacitance Tomography

Biomass provides 10% of the global energy supply and electricity generation from biomass and waste is expected to increase by a factor of 4 by 2030. Currently efficiency of biomass power generation is poor and IEA targets improvements from 18% to 25% by 2030 [1]. Such increases in efficiency will require significant new technology and accurate real-time measurement of the flow of these highly v...

Electrical Capacitance Tomography System

Electrical Capacitance Tomography is a non intruding technique used in industries. It is based on measuring the capacitance of multi-electrode ECT sensor produced by the change in dielectricity or due to change in concentration of material. With the use of computed values, a cross sectional image of the material placed in the dielectric medium is obtained. ECT system can be used in chemical fie...

Investigation of Separator Cyclone Performance Using CFD Simulation: A Case Study of Cement Industry Cyclone

This paper tends to investigate the performance of a separator cyclone used in cement industries in Iran. This investigation was performed using CFD modeling, which is validated by other valid studies. Separator cyclone performance includes of two important parameters as pressure drop and collection ratio. In this presented study, the pressure drop has been considered to assess the performance ...

Measurement of Liquid Velocity and Liquid Distribution in a Packed Bed Using Electrical Resistance Tomography

Electrical Capacitance Tomography with a Square Sensor

Abstract – In the past, electrical capacitance tomography (ECT) with circular sensors has been extensively investigated. For some industrial applications such as circulating fluidised beds, square sensors are required. Research into this specific area has been carried out at UMIST for the first time. To generate sensitivity maps, the Laplace equation is solved using a finite difference method (...