Concentrated Axial Loading Test for Slender Square Hollow Section Retrofitted by Carbon Fiber Reinforced Polymer Sheets(CFRP Sheets)

Behavior of Coupling Beams Strengthened with Carbon Fiber Reinforced Polymer Sheets

In this research, using the results of 6 tests, the effect of Carbon Fiber Reinforced Polymer (CFRP) sheets on the behavior of reinforced concrete coupling beams of shear walls is studied. First, in the experimental part of the study, four coupling beams with different reinforcements were manufactured and tested. Then, after the failure of the specimens, two of them were rehabilitated and stren...

effect of cyclic loading on punching shear strength of slabs strengthened with carbon fiber polymer sheets

in this paper, the effect of cyclic loading on punching strength of flat slabs strengthened with carbon fiber reinforced polymer (cfrp) sheets is studied. experimental results of ten slab specimens under monotonic and cyclic loading are analyzed. eight specimens were strengthened with cfrp sheets on the tensile face of the slabs and the two other specimens were kept un-strengthened as control s...

Effect of ply configuration on hollow square reinforced concrete columns confined with Carbon fibre-reinforced polymer (CFRP)

This paper presents results of testing twelve hollow square reinforced concrete specimens wrapped with Carbon fibre reinforced polymer CFRP. The effect of ply configuration on the behaviour of the specimens is investigated. All specimens were 800mm high and had the dimensions of 200mm× 200mm in cross-section and a hollow core of 80mm× 80mm. The specimens were divided into four groups with three...

Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test

Buckling Behavior of Semi-scale Steel Tank with Carbon Fiber Reinforced Polymer Ring Subjected to Lateral Uniform Pressure Loading

Research on increasing the buckling strength of tanks carrying fluid and also cylindrical shells of thin-walled steel in civil engineering and mechanics is important. This is due to the widespread use of these structures in the industry. Due to the low thickness of the body and also due to the pressure forces entering these tanks, these structures are exposed to lateral buckling. In this resear...