Computer Simulation of Uniaxial Tension Test with Attention to Inhomogeneity in Specimen Model.
نویسندگان
چکیده
منابع مشابه
COMPUTER AIDED OPTIMIZATION OF SPECIMEN GEOMETRY OF HOT TORSION TEST TO MINIMIZE MICROSTRUCTURE NONHOMOGENEITY AND TEMPERATURE GRADIENT BEFORE DEFORMATION
Abstract:Optimization of specimen geometry before subjecting it to hot torsion test (HTT) is essential for minimizingnon-uniform temperature distribution and obtaining uniform microstructure thought the specimen.In the present study, a nonlinear transient analysis was performed for a number of different geometries andtemperatures using the commercial finite element (FE) package ANSYSTM. FE ther...
متن کاملUniaxial Tension Test of Slender Reinforced Early Age Concrete Members
The present study aims to obtain the tensile properties of early age concrete based on a uniaxial tension test employing RC slender members. First, the paper shows that concrete strain is equal to the strain of rebar at the mid-span of the RC member. The tensile Young's modulus and the strain capacity of early age concrete are estimated using strain measurements. The experiment indicated that t...
متن کاملPrediction of Temperature Distribution in the Hot Torsion Test Specimen
Hot torsion test (HTT) has extensively been used to analysis and physically model flow behavior and microstructure evolution of materials and alloys during hot deformation processes. In this test, the specimen geometry has a great influence in obtaining reliable test results. In this paper, the interaction of thermal-mechanical conditions and geometry of the HTT specimen was studied. The commer...
متن کاملFailure Prediction during uniaxial Superplastic Tension using Finite Element Method
Superplastic materials show a very high ductility. This is due to both peculiar process conditions and material intrinsic characteristics. However, a number of superplastic materials are subjected to cavitation during superplastic deformation. Evidently, extensive cavitation imposes significant limitations on their commercial application. The deformation and failure of superplastic sheet metals...
متن کاملInvestigating the Effect of Specimen Diameter Size on Uniaxial Compressive Strength and Elastic Properties of Travertines
Uniaxial compressive strength (UCS) and elastic properties of rocks play a major and vital role for the design of any engineering structure. The specimen diameter size is one of the main factors that influencing on UCS, elasticity modulus and Poisson’s ratio (E and υ). Here, an attempt has been made to investigate the effect of specimen diameter size on UCS, E and υ. Moreover, we studied the co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Shigen-to-Sozai
سال: 1995
ISSN: 0916-1740,1880-6244
DOI: 10.2473/shigentosozai.111.907