Computer Simulation of 3-Dimensional Dendrite Growth Using Modified Phase Field Method
نویسندگان
چکیده
منابع مشابه
Computer simulation of 3 - D grain growth using a phase - field model
The kinetics and topology of grain growth in three dimensions are simulated using a phase-field model of an ideal polycrystal with uniform grain-boundary mobilities and energies. Through a dynamic grain-orientation-reassignment routine, the computational algorithm avoids grain growth via coalescence, thus eliminating the dependence of the simulation results on the number of order parameters imp...
متن کاملComputer Simulation of Grain Growth Using a Continuum Field Model
The kinetics of grain growth in two-dimensions (2-D) were investigated by computer simulations based on a continuum diffuse-interface field model. In this model, a polycrystalline microstructure is described by many orientation field variables whose temporal and spatial evolutions can be obtained by solving the time-dependent Ginzburg-Landau (TDGL) equations. It is found that the time dependenc...
متن کاملConvection effect on dendritic growth using phase-field method
Phase-field model was employed to quantitatively study the effect of convection on pattern selection and growth rate of 2D and 3D dendrite tip, as well as the effect of the different convection velocity on the dendritic growth. The calculated results show that crystal is asymmetric in the priority direction of growth under flow. The dentritic growth is promoted in the upstream region and suppre...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
COMPUTER SIMULATION OF FLUID FLOW FILLING DURING MOLD USING FINITE VOLUME METHOD
In this investigation, ^5 2-D Finite Volume Method (FVM) with unstructured triangular mesh is developed to simulate the mould filling process. The simulation of fluid flow and track of free surface is based on the Marker And Cell (MAC) technique. This technique has capability ofhandling the arbitrary curved solid boundaries in the casting processes. In order to verify the computational results ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2003
ISSN: 0915-1559
DOI: 10.2355/isijinternational.43.1095