COMPUTER MODELING OF STRAINS ON PHASE BOUNDARIES IN DUCTILE CAST IRON AT HOT EXTRUSION
نویسندگان
چکیده
منابع مشابه
Pearlitic ductile cast iron: damaging micromechanisms at crack tip
Ductile cast irons (DCIs) are characterized by a wide range of mechanical properties, mainly depending on microstructural factors, as matrix microstructure (characterized by phases volume fraction, grains size and grain distribution), graphite nodules (characterized by size, shape, density and distribution) and defects presence (e.g., porosity, inclusions, etc.). Versatility and higher performa...
متن کاملNDT of Ductile Cast Iron from Nuclear Waste Storage Canisters
The concept for geological disposal of nuclear waste and spent nuclear fuel relies on a multi-barrier system with the copper/cast iron canister as the first barrier. The canister is designed to retain its integrity for at least 100000 years, which means that future glaciations need to be considered. A thick ice block together with hydrostatic pressure from groundwater would produce hydrostatic ...
متن کاملFatigue Performance of Forged Steel and Ductile Cast Iron Crankshafts
Fatigue is the primary cause of failure of crankshafts in internal combustion engines. The cyclic loading conditions and the stress concentrations in the crank pin fillets are unavoidable, and can result in fatigue failure. The objectives of this study were to compare the fatigue behavior of forged steel and ductile iron crankshafts from a one-cylinder engine as well as to determine if the fati...
متن کاملEffects of Silicon on Mechanical Properties and Fracture Toughness of Heavy-Section Ductile Cast Iron
The effects of silicon (Si) on the mechanical properties and fracture toughness of heavy-section ductile cast iron were investigated to develop material for spent-nuclear-fuel containers. Two castings with different Si contents of 1.78 wt.% and 2.74 wt.% were prepared. Four positions in the castings from the edge to the center, with different solidification cooling rates, were chosen for micros...
متن کاملEffect of Dynamic Strain Aging on Isothermal (473K) Low Cycle Fatigue of Ferritic Ductile Cast Iron
The ferritic ductile iron (FCD400) is widely used as industrial material. As regards to its high temperature application, fatigue at elevated temperature, and advanced mechanical properties has been investigated and clarified. In low cycle fatigue (LCF), the S-N curve is presented by the relation of plastic strain to the number of cycles as fatigue life, which can be predicted by the Manson-Cof...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY)
سال: 2017
ISSN: 2414-0406,1683-6065
DOI: 10.21122/1683-6065-2017-1-123-135