Computational Study of Fatigue Fracture in Rivet Housing of an Aeronautical Aluminum Alloy 7075-T6
نویسندگان
چکیده
منابع مشابه
Surface Characterizations of Fretting Fatigue Damage in Aluminum Alloy 7075-T6 Clamped Joints: The Beneficial Role of Ni–P Coatings
This paper aims to characterize the surface damage as a consequence of fretting fatigue in aluminum alloy 7075-T6 plates in double-lap bolted joints through XRD, surface profilometry, and SEM analyses. The main focus was on the surface roughness and chemical phase composition of the damaged zone along with the identification of fretting fatigue crack initiations over the surface of the material...
متن کاملApplication of the GTN Model in Ductile Fracture Prediction of 7075-T651 Aluminum Alloy
In this paper the capability of Gurson-Tvergaard-Needleman (GTN) model in the prediction of ductile damage in 7075-T651 aluminum alloy is investigated. For this purpose, three types of specimens were tested: Standard tensile bars, Round notched bar (RNB) specimens and compact tension (C(T)) specimens. Standard tensile bar tests were used to obtain the mechanical properties of the material and t...
متن کاملDetecting Milling Deformation in 7075 Aluminum Alloy Aeronautical Monolithic Components Using the Quasi-Symmetric Machining Method
The deformation of aeronautical monolithic components due to CNC machining is a bottle-neck issue in the aviation industry. The residual stress releases and redistributes in the process of material removal, and the distortion of the monolithic component is generated. The traditional one-side machining method will produce oversize deformation. Based on the three-stage CNC machining method, the q...
متن کاملIonic Inhibition of Environmental Fatigue Crack Growth in 7075-t6
The objective of this study is to quantify and understand the effectiveness of a hexavalent chrome replacement ion to inhibit environmentally assisted fatigue crack propagation (EFCP) in high strength aluminum alloys. Because of dynamic-cyclic stress (or strain) loading, fatigue degradation occurs at stress levels considerably lower than the tensile or yield strength; degradation is exacerbated...
متن کاملFlow and fracture behavior of aluminum alloy 6082-T6 at different tensile strain rates and triaxialities
This study aims to investigate the flow and fracture behavior of aluminum alloy 6082-T6 (AA6082-T6) at different strain rates and triaxialities. Two groups of Charpy impact tests were carried out to further investigate its dynamic impact fracture property. A series of tensile tests and numerical simulations based on finite element analysis (FEA) were performed. Experimental data on smooth speci...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Advanced Engineering Research and Science
سال: 2018
ISSN: 2349-6495,2456-1908
DOI: 10.22161/ijaers.5.5.18