Computational Simulation of Spheromak Plasma Heating
نویسندگان
چکیده
منابع مشابه
Formation of a Spheromak Plasma Configuration
As seen in Fig. 1(a), the diabatic signal does indeed increase as the value of n increases. In addition, both ionization features are evident at slew rates differing by a factor of 2 from that used to obtain the data in Fig. 1. When both lasers are polarized parallel to the direction of the electric field, then theoretically no ~ m, ~ = 2 can be produced and, in this case, we observe a dramatic...
متن کاملSimulation O F Inductive Heating Simulation of Inductive Heating
Induction heating is a process whereby heat is generated in electrically conducting materials through ohmic losses from eddy currents induced by varying electromagnetic fields. This phenomenon can be described by a heat transfer equation and an eddy current equation. These two equations are coupled because most of the material properties are temperature-dependent. In this report a description i...
متن کاملNonequilibrium Alfvénic plasma jets associated with spheromak formation.
Nonequilibrium Alfvénic flows have been observed in plasma jets during the helicity injection stage of the Caltech spheromak experiment. Density and time of flight measurements of these jets show that the flows convect dense plasma (beta approximately 1) because of the axial gradient in the current channel profile. A simplified MHD theory is derived to model the flow.
متن کاملSimulation of tissue heating by magnetic fluid hyperthermia
Objective: Magnetic fluid hyperthermia is a technique in which thermal energy is generated by magnetic nanoparticles (MNPs) that are excited by an alternating magnetic field (AC field). During hyperthermia, in-vivo monitoring of elevation of temperature relies on invasive insertion of conventional thermometers, or employment of thermo-sensitive cameras that lack high precision....
متن کاملComputational Modeling of Induction Heating Process
An accurate 2D steady state mathematical model for induction heating process is described and additional results of electromagnetic field, eddy currents distribution and volumetric heat generation have been computed for a sample setup using a finite element method. For the calculations, the input voltage of induction coil is set to be 200 V with a frequency of 10 kHz. It was shown that for the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nuclear Technology - Fusion
سال: 1983
ISSN: 0272-3921
DOI: 10.13182/fst83-a23062