Computational Modeling of the Hydraulic Jump in the Stilling Basin with Convergence Walls Using CFD Codes
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of the Characteristics of Hydraulic Jump in a Diverging Stilling Basin with an Adverse Slope Using Baffle Blocks
Stilling basins have been used as an energy dissipater downstream of hydraulic structures. Dimensions of the stilling basins depends on hydraulic jump characteristics. In this research diverging hydraulic jump with an adverse slope using baffle blocks and an end sill have been studied experimentally and effect of diverging angle of the walls, adverse bed slope and baffle blocks on the hydraulic...
متن کاملForced Hydraulic Jump by One and Two Continuous Sills in a Horizontal Stilling Basin.
Forced hydraulic jump in a horizontal stilling basin with one and two continuous sills at the downstream end of an ogee standard weir was investigated. Experiments were completed on sills of five different heights which were fixed at two different distances from the toe of the weir. The main characteristics of the jump such as the sequent depth ratio, relative roller length, and relative ener...
متن کاملForced Hydraulic Jump by One and Two Continuous Sills in a Horizontal Stilling Basin.
Forced hydraulic jump in a horizontal stilling basin with one and two continuous sills at the downstream end of an ogee standard weir was investigated. Experiments were completed on sills of five different heights which were fixed at two different distances from the toe of the weir. The main characteristics of the jump such as the sequent depth ratio, relative roller 
length, and relative en...
متن کاملthe investigation of research articles in applied linguistics: convergence and divergence in iranian elt context
چکیده ندارد.
Characteristics of S-jump on Roughened Bed Stilling Basin
Formation of hydraulic jump is necessary for dissipation of the excess kinetic energy downstream of spillways and gates. Hydraulic jump stilling basins of sudden expansion are one of the energy dissipater structures which are used where the available tail water depth is less than the required sequent depths. In the present study to further reduce the hydraulic jump sequent depths ratio, a rough...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Arabian Journal for Science and Engineering
سال: 2014
ISSN: 1319-8025,2191-4281
DOI: 10.1007/s13369-014-1466-z