COMPUTATIONAL FLUID DYNAMIC (CFD) SIMULATION ON REDESIGN BAFFLES OF YOGYAKARTA INTERNATIONAL AIRPORT TRAIN FUEL TANK
نویسندگان
چکیده
The tank is one of the most important components in train which serves as a place to store fuel. However, so far has been component that gone unnoticed, even though there very issue consider, namely how fluid moves due movement while moving. free liquid called sloshing. Sloshing can be reduced by adding anti-sloshing baffles. So it necessary simulate sloshing taking into account value vehicle subsystem and variation baffles design used. There are several models fuel used this study, tanks without baffles; longitudinal (2) lateral (1) - existing (3) with circular perforations; horizontal perforations. This study aims provide configuration optimally reduce occurs. simulation variations was carried out applying Computational Fluid Dynamic (CFD) method. From results, concluded best performance an effectiveness 34.33% reducing
منابع مشابه
Numerical Simulation of Laminar Convective Heat Transfer and Pressure Drop of Water Based-Al2O3 Nanofluid as A Non Newtonian Fluid by Computational Fluid Dynamic (CFD)
The convective heat transfer and pressure drop of water based Al2O3 nanofluid in a horizontal tube subject to constant wall temperature condition is investigated by computational fluid dynamic (CFD) method. The Al2O3 nanofluid at five volume concentration of 0.1, 0.5, 1.0, 1.5 and 2 % are applied as a non Newtonian power law and Newtonian fluid with experimentally measured properties of density...
متن کاملImplementing Cfd (computational Fluid Dynamics) in Opencl for Building Simulation
Though researchers in computer graphics have started to use the GPGPU (General Purposed Graphics Processing Unit) method to speed up their procedural programs, these techniques are seldom used in the building simulation field. It is possible to apply the GPGPU method to many simulation scenarios (i.e. human evacuation, shadow simulation) to speed up performance. In this paper, CFD is used as an...
متن کاملEffect of Wire Pitch on Capacity of Single Staggered Wire and Tube Heat Exchanger Using Computational Fluid Dynamic Simulation
Single staggered is a design development of normal wire and tube heat exchanger that wires are welded with staggered configuration on two sides. Capacity of wire and tube heat exchanger is the ability of the heat exchanger to release heat. The objective of this study is to analyse the effect of wire pitch (pw) on capacity of single staggered wire and tube heat exchanger. The research...
متن کاملComputational Fluid Dynamic (cfd) Simulation of Fluid Flow in a Mixer-settler Extractor for Rare Earth Metal Separation
Computational fluid dynamic (CFD) simulation is an effective research approach for understanding velocity fields used in process and equipment intensification. It was found that mixer-settler used in rare earth metal extraction process was unsatisfying in large amount of liquid backlogged, high energy consumption and longtime settling process. In this paper, CFD simulations and experiment valid...
متن کاملCFD Simulation of the Fluid Hydrodynamics in a Continuous Stirred-Tank Reactor
Continuous stirred-tank reactors (CSTR) are widely applied in the chemical, food, and pharmaceutical engineering fields. The micro-scale fluid dynamics are important for the optimal processing study since they have a dominating influence on the overall performance of the reactor. In this article, 3-dimensional Computational Fluid Dynamics (CFD) simulations are carried out to portray the flow ch...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Media Mesin: Majalah Teknik Mesin
سال: 2023
ISSN: ['1411-4348', '2541-4577']
DOI: https://doi.org/10.23917/mesin.v24i1.19591