Computational Evaluation of Thermal and Hydraulic Characteristics of Flat-Plate Solar Collector for Different Glazing Material
نویسندگان
چکیده
منابع مشابه
Theoretical Model of a Flat Plate Solar Collector Integrated with Phase Change Material
Abstract—The objective of this work was to develop a theoretical model to study the dynamic thermal behavior of a flat plate solar collector integrated with a phase change material (PCM). The PCM acted as a heat source for the solar system during low intensity solar radiation and night. The energy balance equations for the various components of the collector as well as for the PCM were formulat...
متن کاملModeling of Flat-Plate Solar Collector Operation in Transient States
Saleh, Ahmad M. M.S.E., Purdue University, May 2012. Modeling Of Flat-Plate Solar Collector Operation in Transient States. Major Professor: Hosni Abu-Mulaweh. Solar energy is becoming an alternative for the limited fossil fuel resources. One of the simplest and most direct applications of this energy is the conversion of solar radiation into heat, which can be used in water heating systems. A c...
متن کاملdesign, construction and evaluation of solar flat-plate collector simulator based on the thermohydraulic coefficient
introduction increasing the area of absorber plate between the flowed air through the duct can be accomplished by corrugating the absorber plate or by using the artificial roughness underside of the absorber plate as the commercial methods for enhancing the thermohydraulic performance of the flat plate solar air heaters. evaluation of this requires the construction of separated solar air heater...
متن کاملcomparing between predicted output temperature of flat-plate solar collector and experimental results: computational fluid dynamics and artificial neural network
introduction the significant of solar energy as a renewable energy source, clean and without damage to the environment, for the production of electricity and heat is of great importance. furthermore, due to the oil crisis as well as reducing the cost of home heating by 70%, solar energy in the past two decades has been a favorite of many researchers. solar collectors are devices for collecting ...
متن کاملEnergy, economic and environmental analysis of metal oxides nanofluid for flat-plate solar collector
For a solar thermal system, increasing the heat transfer area can increase the output temperature of the system. However, this approach leads to a bigger and bulkier collector. It will then increase the cost and energy needed to manufacture the solar collector. This study is carried out to estimate the potential to design a smaller solar collector that can produce the same desired output temper...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Today: Proceedings
سال: 2018
ISSN: 2214-7853
DOI: 10.1016/j.matpr.2018.10.065