COMPRESSIVE YOUNG'S MODULUS OF FLEXIBLE POLYURETHANE FOAM
نویسندگان
چکیده
منابع مشابه
Waste Minimization Strategy: Flexible Polyurethane Foam Manufacture
Methylene chloride and CFCs are used as auxiliary blowing agents in the manufacture of flexible polyurethanefoams and are promptly emitted during the manufacturing processes.The concentrationof the auxiliary blowing agent are quite low due to the accepted practice of using large volumes of air to lower the ambient concentration of toxic isocyanates (a key chemical in the urethane reaction seque...
متن کاملModeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...
متن کاملNovel Gelling Catalyst for Non-Emission Flexible Polyurethane Foam
Flexible and semi-rigid polyurethane foams have been widely used in automotive interior parts, residential upholstered furniture and bedding. In these, as well as other end use industries, a reduction of Volatile Organic Compounds (VOCs) emissions from polyurethane foams continues to be an important issue [1, 2]. To address this challenge, reactive amine catalysts, which have an active hydrogen...
متن کاملAnisotropic polyurethane foam
Anisotropic polymer foams have been prepared, which exhibit a Poisson's ratio exceeding 1, and ratios of longitudinal to transverse stiffness exceeding 50. The foams are as much as 20 times stiffer in the longitudinal direction than the foams from which they were derived. The transformation process involved applying a uniaxial stress sufficient to produce 25% to 45% axial strain to open-cell po...
متن کاملThe Pore Characteristics of Geopolymer Foam Concrete and Their Impact on the Compressive Strength and Modulus
The pore characteristics of geopolymer foam concretes (GFCs) manufactured in the laboratory with 0–16% foam additions were examined using image analysis (IA) and vacuum water saturation techniques. The pore size distribution, pore shape, and porosity were obtained. The IA method provides a suitable approach to obtain the information of large pores, which are more important in affecting the comp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sen'i Gakkaishi
سال: 1975
ISSN: 0037-9875,1884-2259
DOI: 10.2115/fiber.31.4_t111