Compressive Behavior of Open-Cell Titanium Foams with Different Unit Cell Geometries

Compressive Properties of Open-Cell Al Hybrid Foams at Different Temperatures

Hybrid Ni/Al foams were fabricated by depositing electroless Ni-P (EN) coatings on open-cell Al foam substrate to obtain enhanced mechanical properties. The microstructure, chemical components and phases of the hybrid foams were observed and analyzed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD), respectively. The mechanical proper...

Simulation of Thermal Transport in Open-Cell Metal Foams: Effect of Periodic Unit Cell Structure

Measurement and Modeling of Creep in Open-Cell NiAl Foams

Nickel-rich NiAl foams, consisting of open cells with hollow struts and exhibiting two relative densities (5.0 and 6.6 pct) and average cell sizes (1.27 and 0.85 mm), were creep tested between 800 °C and 1100 °C under compressive stresses between 0.10 and 1.50 MPa. For stresses lower than 0.50 MPa, the foams exhibit secondary creep with power-law behavior characterized by creep exponents and ac...

Scaling equation for yield strength of nanoporous open-cell foams

A comprehensive study on the relationship between yield strength, relative density and ligament sizes is presented for nanoporous Au foams. Depth-sensing nanoindentation tests were performed on nanoporous foams ranging from 20% to 42% relative density with ligament sizes ranging from 10 to 900 nm. The Gibson and Ashby yield strength equation for open-cell macrocellular foams is modified in orde...

Microtomography-Based Simulation of Transport Through Open-Cell Metal Foams