Compression moulding of SMC: In situ experiments, modelling and simulation
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
The Empact CVT: modelling, simulation and experiments
• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...
متن کاملAdvance Modelling and Simulation of Industrial Boilers
This paper presents some of the results of the simulation in the radiation section of an industrial boiler using an advanced mathematical model. Calculations are described for the flow, heat transfer, and chemical reaction processes occurring within a gas-fired cylindrical furnace. The calculation procedure is a two dimensional one in which the main hydrodynamic variables are the velocity and s...
متن کاملSimulation Tools for Injection Moulding
In this paper the concern is certain simulation tools for the lling phase of injection moulding of plastics. A mathematical model, called the distance model, of the injection moulding process has been developed by Professor Gunnar Aronsson at the University of Linkk oping. From this model one can nd the lling pattern (i.e. ow fronts) of the molten polymer as it enters the mould, by solving a sh...
متن کاملIn-Situ Data Compression for Flow Simulation in Porous Media
Supercomputing simulations easily generate datasets in the range of tera or even peta bytes. However, writing datasets during simulation and reading them for post-processing implies a high I/O load and thus imposes a major bottleneck. In the computation phase, compute nodes stall at writing large amounts of data and the simulation slows down scientists have to capture data less frequently losin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part A: Applied Science and Manufacturing
سال: 2007
ISSN: 1359-835X
DOI: 10.1016/j.compositesa.2006.03.010