Compression-Loaded Cracked Cylinder - Stress Intensity Factor Evaluation
نویسندگان
چکیده
منابع مشابه
Calculation of Stress Intensity Factor in Rotary Cracked Disks with Central Hole by Using Emulator Technology
In this paper, the crack growth and variations of stress intensity factor in rotary disks with central hole is studied. For modeling and analyzing samples, the FRANC2D software is used and to predict stress intensity factor, DACE emulator (Design & Analysis of Computer Experiments) is used and, at the end comparison between results of modeling and results of simulator has been done. The emulato...
متن کاملPLASTIC INTENSITY FACTORS FOR CRACKED PLATESt
An elastic-plastic analysis is performed for two problems relevant to fracture mechanics: a semi infinite body with an edge crack in a far out-of-plane shearing field and an infinite plate under plane stress conditions containing a finite line crack in a remote tensile field. Amplitudes of the dominant singularity in the plastic region at the crack tip, the plastic stress and strain intensity ...
متن کاملCalculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress
In this paper, the problem of calculating the stress intensity factor (SIF) for an orthotropic thick-walled cylinder with a small radial crack subject to internal pressure is considered. The crack is assumed to be an edge crack on the external radius of the cylinder. The stress intensity factor is calculated by superposition of an uncracked cylinder with uniform stress distribution and a cylind...
متن کاملJustification and Imfroveme~ of Kienzler and Herrma~s Estimate of Stress Intensity Factors of Cracked Beam
Kienzler and Hernnan recently showed that good and remarkably simple approximations of the stress intensity factors of cracks in beams can be obtained by bending theory estimations of the strain energy release as the crack is widened into a band of finite width. Their method has been based on equating this energy release to the energy release rate due to crack length extension, which has been p...
متن کاملFracture Behavior Prediction for Rapidly Loaded Surface Cracked Specimens
The feasibility of predicting the fracture behavior of surface cracks from shallow cracked bend specimens was investigated. The material studied was a high-strength steel stress relief embrittled to various levels of Charpy-V notch impact toughness. Material toughness was quantified in terms of the J-intergral at total specimen failure (-/„,,), using both deeply notched and shallow-notched bend...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Key Engineering Materials
سال: 2018
ISSN: 1662-9795
DOI: 10.4028/www.scientific.net/kem.774.331