Compression and recovery micro-mechanisms in flexible graphite
نویسندگان
چکیده
منابع مشابه
Exergy Recovery in Gas Pressure Compression Stations (GPCSs)
The exergy analysis is a proper method for performance evaluation of industrial systems. A generic and detailed analysis of the GPCSs on the second gas pipeline of Iran is made by the means of exergy. The two main improvement measures of fuel pre-heating and steam injection technologies are presented for the current conventional stations. Steady state equations regarding the second law of ther...
متن کاملSimulation of Oil Reservoirs Driving Indices and Recovery Mechanisms
Different recovery mechanisms are activated during the production from reservoirs. Wells sometimes are kept with the injection. Therefore the evaluation of injection indices depended on material injection, seems to be necessary. This study is going to determine the drive indices for a reservoir by making a model using Eclipse. The model consists a gas cap and aquifer, in which there is an injec...
متن کاملFlexible Graphite-on-Paper Piezoresistive Sensors
We demonstrate novel graphite-on-paper piezoresistive devices. The graphite was used as sensing component. The fabrication process can be finished in a short time with simple tools (e.g., a scissor and a pencil). A small array of six paper-based piezoresistive devices is made. The whole device is flexible. The test results showed that the change of resistance was proportional to the applied for...
متن کاملFlexible Micro Processing by Multiple Micro Robots in SEM
In this paper, we describe the newly developed flexible micro processing system assisted by 1 inch size robots in the scanning electron microscope. After showing the overall system, the basic performances of the small robot that is composed of piezo elements and electromagnets are presented and then the magnetic shield property is considered to prevent the SEM image distortion due to magnetic f...
متن کاملModeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Carbon
سال: 2013
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2013.03.008