Comprehensive Recovery of Multisource Metallurgical Wastes: Recycling Nickel Slag by Aluminum Dross with Converter-Slag Addition
نویسندگان
چکیده
منابع مشابه
Effect of aging on Phosphorus removal of metallurgical slag and heat reactivation of aged slag
In order to examine the effect of ageing on P removal capacity, the phosphorus (P) removal capacity of three types of slag, argon oxygen decarburisation slag (AOD), blast furnace slag (BFS) and electric arc furnace slag (EAF), was examined after 0, 10, 13 and 19 months in batch experiments. The results showed that ageing reduced P removal capacity, e.g. by 78.4% for 19-month-old AOD slag. For B...
متن کاملUtilization of Eaf Metallurgical Slag in “green” Belite Cement
În acest studiu, zgură de cuptor cu arc electric (EAFS) colectată de la Sovel S.A., Grecia şi calcar şi argilă, de la compania de ciment Titan S.A., Grecia, au fost utilizate pentru producerea şi caracterizarea cimenturilor tip belitice. Trei tipuri de clincher au fost preparate: belitic fara adaos de zgură folosit ca referinţă (BC), unul cu 5wt% EAFS (BC5) şi un altul cu 10wt% EAFS (BC10). Ana...
متن کاملRecovery of Copper from Copper Slag and Copper Slag Flotation Tailings by Oxidative Leaching
Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...
متن کاملComputer Simulation of Slag Splashing in a Steelmaking Converter
Some variables that influence the slag splashing phenomenon in an oxygen steelmaking converter are numerically analyzed in this work. The effect of lance height, jet velocity, jet exit angle and slag viscosity on the washing and ejection mechanisms of slag splashing is studied in this work employing twodimensional transient computational fluid dynamics simulations. A parameter here called avera...
متن کاملEvaluation of trace element availability from secondary metallurgical slag generated in steelmaking by sequential chemical extraction
During carbon steel manufacture, slag residues are generated to remove material impurities from liquid metal and thus control the quality of carbon steel. As the utilization of secondary metallurgical slags is not as efficient as those of primary slags, a comprehensive characterization of steel ladle slag was performed. Pseudo-total concentrations of a wide range of elements were determined dur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2020
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2019-670