Comprehensive analysis of material removal rate, tool wear and surface roughness in electrical discharge turning of L2 tool steel
نویسندگان
چکیده
منابع مشابه
Effect of Cutting Parameters on Tool Wear, Surface Roughness and Material Removal Rate During Dry Turning of EN-31 Steel
ISBN 978-93-82338-21-5 | © 2012 Bonfring Abstract--The present paper is an experimental study to investigate the effect of cutting parameters (cutting speed, depth of cut and feed) on tool wear, surface roughness and material removal rate (MRR) during dry turning of EN-31 steel. Turning experiments were conducted with cutting speeds: 250, 300, 350 m/min, feeds: 0.15, 0.2, 0.25 mm/rev and depth ...
متن کاملpredictive modeling of surface roughness and material removal rate in turning of ud-gfrp composites using carbide (k10) tool
this work presents an experimental investigation of the influence of the six important machining parameters (tool nose radius, tool rake angle, feed rate, cutting speed, cutting environment (dry, wet and cooled) and depth of cut) on surface roughness & material removal rate in the machining unidirectional glass fiber reinforced plastics (ud-gfrp) composite using carbide (k10) cutting tool durin...
متن کاملTool Wear and Surface Roughness in Turning AISI 8620 using Coated Ceramic Tool
The purpose of this research paper is to study the tool wear and surface roughness of AISI 8620 material using coated ceramic tool by turning process. Ceramic cutting tools have outstanding material hardness, resistance to high temperatures, wear resistance, chemical stability and hot hardness. Ceramic tool with Al2O3 + TiC (golden) coating was used to investigate the surface roughness and tool...
متن کاملComparative Neural Network Models on Material Removal Rate and surface Roughness in Electrical Discharge Machining
Electro-discharge machining (EDM) is increasingly being used in many industries for producing molds and dies, and machining complex shapes with material such as steel, cemented carbide, and engineering ceramics. The stochastic nature of EDM process has frustrated number of attempts to model it physically. Artificial neural networks (ANNs), as one of the most attractive branches in Artificial In...
متن کاملAnalysis of Surface Roughness and Material Removal Rate in Dry and Cryogenic Machining of En31 Steel
Production rates play important role in the turnover of any industry. In order to increase the production rates, industrial processes are need to be speedup by speeding input parameters such as cutting speeds, feed rates etc. But with the higher speeds and feeds the heat generation also increases between tool-chip, tool and work piece interfaces, which reduce the tool life, product quality and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research and Technology
سال: 2020
ISSN: 2238-7854
DOI: 10.1016/j.jmrt.2020.04.060