Compositionally graded YSZ–NiO composites by surface laser melting
نویسندگان
چکیده
منابع مشابه
Compositionally graded YSZ-NiO composites by surface laser melting
Laser surface melting has been applied to near eutectic NiO-YSZ sintered ceramics. The objective is to generate a functional gradient composite material with graded microstructure and composition. At low solidification rates the resultant material has a graded composition, with a severe NiO segregation towards the surface. A thick NiO layer whose thickness depends on the travelling speed is for...
متن کاملFunctionally Graded High Strengh Ceramics Obtained by Selective Laser Melting
Henriques B 1,2* 1CMEMS-UMinho, University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal 2Federal University of Santa Catarina, Campus Blumenau , 89065-300, Blumenau/SC, Brazil *Corresponding author: Henriques B, CMEMS-UMinho, University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal. Federal University of Santa Catarina, Campus Blumenau , 89065-300, Blumenau/SC, Brazil, E-...
متن کاملHigh tunability in compositionally graded epitaxial barium strontium titanate thin films by pulsed-laser deposition
Compositionally graded barium strontium titanate @(BaxSr12x)TiO3—BST, x50.75, 0.8, 0.9, and 1.0# thin films are fabricated by pulsed-laser deposition on a LaAlO3 substrate with (La0.7Sr0.3)MnO3 as the bottom electrode. A high dielectric permittivity and temperature characteristic without Curie–Weiss law are obtained. A tunability of over 70% is obtained at frequency of 1 MHz, which is higher th...
متن کاملFabrication of compositionally and structurally graded Ti-TiO2 structures using laser engineered net shaping (LENS).
Novel structures with functional gradation in composition and structure were successfully made in Ti-TiO(2) combination using laser engineered net shaping. The addition of fully dense, compositionally graded TiO(2) ceramic on porous Ti significantly increased the surface wettability and hardness. The graded structures with varying concentrations of TiO(2) on the top surface were found to be non...
متن کاملNumerical Simulation Of Heat Affected Zone Microstructure During Laser Surface Melting
Microstructural changes during laser welding and laser surface treatment has been regarded by many researchers. Most researches have focused on studying the effect of various process parameters on the size and microstructure of the heat affected zone. But some studies show that the initial microstructure of the base metal can also affect the heat affected zone dimensions and final microstructur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the European Ceramic Society
سال: 2010
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2009.04.031