Composition, tensile strength, and elastic modulus of Orden as cast post alloy
نویسندگان
چکیده
منابع مشابه
Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes
We have conducted pulling and bending tests on individual carbon nanotubes in-situ in a transition electron microscope. Based on our observation of the force required to break the tube, a tensile strength of 0.15 TPa was computed. From corresponding bending studies on such nanotubes, the Young’s modulus was estimated to be 0.9 TPa (0.8 TPa after ‘sub continuum’ corrections). These results sugge...
متن کاملSimulation of the Tensile Modulus and the Tensile Strength of Short Fibre Reinforced Polymers (SFRP)
This paper presents the simulation of the tensile modulus and the tensile strength of shor t glass fibre reinforced Polypropylene. Various formulae of the shear-lag theory were implemented in an analytical calculation program to evaluate the tensile strength values. Based on the homogenization approach the modulus values and the strength values, applying an existing failure criterion, were calc...
متن کاملتولید، مشخصه یابی و ارزیابی خواص مکانیکی نانوکامپوزیت آلیاژ پایه کبالت با تقویت کننده نانوپودر فورستریت
Short life of current total hip replacement metallic implants is generally dependent on the aseptic loosening of the implant, which occurs due to mismatch of elastic modulus between bone and metallic implant materials. Decreasing in elasticmodulus of implant could be successful. Forsterite is biocompatible and bioactive ceramic which has suitable mechanical properties. In presented research the...
متن کاملAb initio elastic properties and tensile strength of crystalline hydroxyapatite.
We report elastic constant calculation and a "theoretical" tensile experiment on stoichiometric hydroxyapatite (HAP) crystal using an ab initio technique. These results compare favorably with a variety of measured data. Theoretical tensile experiments are performed on the orthorhombic cell of HAP for both uniaxial and biaxial loading. The results show considerable anisotropy in the stress-strai...
متن کاملEFFECTS OF HOT ISOSTATIC PRESSING ON THE TENSILE PROPERTIES OF A356 CAST ALLOY
The influences of age hardening and HIP (Hot Isostatic Pressing) on the mechanical properties of A356 (Al 7Si 0.6 Mg) casting alloys were studied. Cast bars were homogenized, heated and maintained at a temperature of 540°C for a duration of 2 hours, followed by rapid cooling in a polymeric solution. The castings were age hardened at 180°C for a duration of 4 hours before being subjected to HIP ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Padjadjaran Journal of Dentistry
سال: 2010
ISSN: 2549-6212,1979-0201
DOI: 10.24198/pjd.vol22no1.14069