Composition control of Cu2ZnSnSe4-based solar cells grown by coevaporation
نویسندگان
چکیده
منابع مشابه
control of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولAlGaAs/GaAs Heterostructure Solar Cells Grown by Molecular Beam Epitaxy
The AlGaAs/GaAs heterostructure solar cells were fabricated by molecular beam epitaxy (MBE), which provides ultra-thin molecular layers of the design structure. The typical efficiency of the solar cells fabricated and their characteristics are η = 17%, Voc = 0.73 V, Isc = 33 mA/cm, and F.F. = 0.7. Spectral response of the solar cells show a broad spectrum ranging from 500 to 900 nm, correspondi...
متن کاملThin crystalline silicon solar cells based on epitaxial films grown at 165°C by RF-PECVD
We report on heterojunction solar cells whose thin intrinsic crystalline absorber layer has been obtained by plasma enhanced chemical vapor deposition at 165°C on highly doped p-type (100) crystalline silicon substrates. We have studied the effect of the epitaxial intrinsic layer thickness in the range from 1 to 2.4 μm. This absorber is responsible for photo-generated current whereas highly dop...
متن کاملStudy the Effect of Silicon Nanowire Length on Characteristics of Silicon Nanowire Based Solar Cells by Using Impedance Spectroscopy
Silicon nanowire (SiNW) arrays were produced by electroless method on polycrystalline Si substrate, in HF/ AgNO3 solution. Although the monocrystalline silicon wafer is commonly utilized as a perfect substrate, polycrystalline silicon as a low cost substrate was used in this work for photovoltaic applications. In order to study the influence of etching time (which affects the SiNWs length) on d...
متن کاملSequentially Vapor-Grown Hybrid Perovskite for Planar Heterojunction Solar Cells
High-quality and reproducible perovskite layer fabrication routes are essential for the implementation of efficient planar solar cells. Here, we introduce a sequential vapor-processing route based on physical vacuum evaporation of a PbCl2 layer followed by chemical reaction with methyl-ammonium iodide vapor. The demonstrated vapor-grown perovskite layers show compact, pinhole-free, and uniform ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Thin Solid Films
سال: 2014
ISSN: 0040-6090
DOI: 10.1016/j.tsf.2013.11.078