Composites Wood Fiber/HDPE. Characterization by SEM
نویسندگان
چکیده
منابع مشابه
CHARACTERIZATION OF PF/PVAC HYBRID ADHESIVE-WOOD INTERACTION AND ITS EFFECT ON WOOD STRAND COMPOSITES PERFORMANCE By
by Yang Cao, M.S. Washington State University August 2010 Co-Chairs: Vikram Yadama Jinwen Zhang A multifunctional hybrid adhesive system developed for profiled composite manufacturing was examined in this study. A binary adhesive system, phenol formaldehyde (PF)/ polyvinyl acetate (PVAc), offers initial adhesion to improve wood-strand mat handling during the first stage of composite processing,...
متن کاملCHAPTER 3 Compositional Analysis of Thermoplastic Wood Composites by TGA
A method has been developed for the quantitative determination of the composition of thermoplastic wood composites. The method involves area measurements of the two peaks in the derivative curve of a tracing produced by the thermogravimetric analysis (TGA) of a thermoplastic composites sample in an inert atmosphere. This may involve the standard, constant heating rate-method, or the high resolu...
متن کاملFracture Toughness of Wood and Wood Composites during Crack Propagation
The mode I fracture toughness as a function of crack length of medium density fiberboard (MDF), particle board (PB), and Douglas-fir (DF) were all measured using a new energy-based method. PB and MDF are examples of composites that develop fiber bridging during crack propagation, which causes their toughness to increase with crack length. Longitudinal cracks in DF also displayed fiber bridging ...
متن کاملWood–Polymer Composites Prepared by the In Situ Polymerization of Monomers Within Wood
Wood–polymer composites (WPCs) were prepared from poplar wood (P. ussuriensis Komarov) in a two-step procedure. Maleic anhydride (MAN) was first dissolved in acetone and impregnated into wood; this was followed by a heat process; and then, glycidyl methacrylate (GMA) and styrene (St) were further impregnated into the MAN-treated wood, followed by a second thermal treatment. Finally, the novel W...
متن کاملFracture process characterization of fiber-reinforced dental composites evaluated by optical coherence tomography, SEM and optical microscopy.
This study used optical coherence tomography (OCT) compared to scanning electron microscopy (SEM) and optical microscopy (OM) to evaluate qualitatively crack propagation and final fracture in restorative composite materials - Filtek Z250 and Filtek Z350 (3M ESPE) - with fiber reinforcement after cyclic loading. Samples were made using a split mold. Initially, 3-point bending tests were performe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2005
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927605507281