Composite Corundum Ceramics with Reinforcing Carbon Nanotubes Modified with Eutectic Additives
نویسندگان
چکیده
The characteristics of composite materials Al 2 O 3 system - carbon nanotubes eutectic additives are investigated. influence the reinforcing component content, as well mode high-temperature heat treatment in vacuum on strength properties material considered. Samples with a mass content tubes 0.4% were obtained. These samples had following characteristics: an average tensile at three-point bending 380 MPa, open porosity 0.9%, density 3.71 g/cm .
منابع مشابه
Composite yarns of multiwalled carbon nanotubes with metallic electrical conductivity.
Unique macrostructures known as spun carbon-nanotube fibers (CNT yarns) can be manufactured from vertically aligned forests of multiwalled carbon nanotubes (MWCNTs). These yarns behave as semiconductors with room-temperature conductivities of about 5 x 10(2) S cm(-1). Their potential use as, for example, microelectrodes in medical implants, wires in microelectronics, or lightweight conductors i...
متن کاملJoining prepreg composite interfaces with aligned carbon nanotubes
1359-835X/$ see front matter 2008 Elsevier Ltd. A doi:10.1016/j.compositesa.2008.03.011 * Corresponding author. Tel.: +1 617 252 1539. E-mail address: [email protected] (B.L. Wardle). An interlaminar reinforcement using aligned carbon nanotubes (CNTs) is demonstrated for prepreg unidirectional carbon tape composites. Aligned CNTs are grown at high temperature and then transferprinted to prepreg at...
متن کاملGold Nanoparticles/Carbon Nanotubes Composite Film Modified Glassy Carbon Electrode Determination of Meclofenoxate Hydrochloride
A novel voltammetric sensor based on gold nanoparticles (GNPs) and single-walled carbon nanotubes (SWNTs) composite was developed. The nanocomposite modified electrode was characterized using atoms force microscope (AFM). The electrochemical behavior of meclofenoxate hydrochloride (MFX) was investigated on this sensor. The results indicated that the GNPs/SWNTs modified electrode exhibited effic...
متن کاملCarbon Capture Using Amine-modified Carbon Nanotubes
The increasing rise in the rate of both anthropogenic CO2 emissions and atmospheric CO2 concentration, combined with an evolving understanding of what this means for global climate change both now, and in the future, has increased the need for novel technologies for CO2 capture from large point sources. Current industry standards involve the use of amine solvents, which have a large parasitic l...
متن کاملAdsorptive Behavior and Voltammetric Determination of Hydralazine Hydrochloride at A Glassy Carbon Electrode Modified with Multiwalled Carbon Nanotubes
An electroanalytical method has been introduced for highly sensitive determination of hydralazine hydrochloride (Hy-HCl) based on its oxidation at a glassy carbon electrode modified with multiwalled carbon nanotubes (MWCNT/GCE). Studies showed that the electrochemical oxidation of Hy-HCl was accompanied by adsorption and highly sensitive responses could be achieved by adsorptive stripping volta...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC web of conferences
سال: 2021
ISSN: ['2261-236X', '2274-7214']
DOI: https://doi.org/10.1051/matecconf/202134602007