Complex Permeability Spectra of Polycrystalline Li-Zn Ferrites

Complex Permeability and Dielectric Behaviors of Eu Doped Ni-zn Ferrites

The Manufacture of High Permeability Mn-Zn Ferrites by Atmospherical Protect

For the manufacture of high permeability Mn-Zn ferrite cores, the zinc loss from the surface of sintering cores causes poor yield rate of final products. This experiment uses the atmospherical protection to reduce the evaporation of zinc. The control of the oxygen partial pressure and flow rate precisely can reduce the zinc loss about 20% to 35%, but it is not enough to get a good distribution ...

Enhancement of the Magnetic Properties for Co-Mn-Zn Ferrites

Aluminum substituted cobalt manganese zinc ferrite nanoparticles Co0.425Mn0.425Zn0.150AlxFe2-xO4 (from x= 0.0 to 0.15 with step 0.025) have been synthesized by chemical co-precipitation route. X-ray diffraction (XRD) and infrared spectroscopy (FTIR) revealed that the obtained powders have a single phase of cubic spinel structure. The crystallite sizes calculated from XRD data have been confirme...

Elastic behaviour of Sn doped Ni-Zn ferrites

The polycrystalline Sn added Ni-Zn ferrites were prepared using the conventional sintering method. The monophasic nature of the samples was characterized using X-rays. The elastic behavior has been measured in the temperature range 80-410oC using the composite oscillator method. The values of Young’s and shear modulus are corrected to theoretical density using the method of Mackenzie method. Th...

GAS SENSING PROPERTIES OF POROUS Cu-, Cd- AND Zn- FERRITES

Some spinel ferrites, MFe2O4 (M = Cu, Cd and Zn), having submicron grain sizes (0.1–0.7μm) were prepared by sol-gel-selfcombustion and their sensing properties to reducing gases were investigated. The gas sensing characteristics were obtained by measuring the sensitivity as a function of various controlling factors, like operating temperature, composition and concentration of the gas, and final...