Competing nucleation of single- and double-layer Guinier–Preston zones in Al–Cu alloys
نویسندگان
چکیده
منابع مشابه
Defects Associated with Nanostructures in AlZnMg and AlCu(Mg) Alloys
The present work reports on a positron annihilation study addressing the structural and chemical characterization of solute aggregates containing open volumes (vacancies and/or misfit regions at precipitate–matrix interfaces) in AlZnMg, AlCu, and AlCuMg alloys. High resolution transmission electron microscopy results for selected ageing conditions are also presented. Two main points are discuss...
متن کاملinvestigation of single-user and multi-user detection methods in mc-cdma systems and comparison of their performances
در این پایان نامه به بررسی روش های آشکارسازی در سیستم های mc-cdma می پردازیم. با توجه به ماهیت آشکارسازی در این سیستم ها، تکنیک های آشکارسازی را می توان به دو دسته ی اصلی تقسیم نمود: آشکارسازی سیگنال ارسالی یک کاربر مطلوب بدون در نظر گرفتن اطلاعاتی در مورد سایر کاربران تداخل کننده که از آن ها به عنوان آشکارساز های تک کاربره یاد می شود و همچنین آشکارسازی سیگنال ارسالی همه ی کاربران فعال موجود در...
Efficiency Enhancement of Si Solar Cells by Using Nanostructured Single and Double Layer Anti-Reflective Coatings
The effect of single and double-layer anti-reflective coatings on efficiency enhancement of silicon solar cells was investigated. The reflectance of different anti-reflection structures were calculated using the transfer matrix method and then to predict the performance of solar cells coated by these structures, the weighted average reflectance curves were used as an input of a PC1D simulation....
متن کاملdetermination of maximal singularity free zones in the workspace of parallel manipulator
due to the limiting workspace of parallel manipulator and regarding to finding the trajectory planning of singularity free at workspace is difficult, so finding a best solution that can develop a technique to determine the singularity-free zones in the workspace of parallel manipulators is highly important. in this thesis a simple and new technique are presented to determine the maximal singula...
15 صفحه اولAnalysis of the Frequency Effects on Design and Back-Iron Characteristics of Double-Layer Secondary Single-Sided Linear Induction Motors
Input frequency is one of the important variables in design and performance analysis of single-sided linear induction motors (SLIMs). Changing the frequency changes both the dimension of the SLIM in design process and the performance of the designed motor. The frequency influences the induced eddy currents in the secondary sheet as well as saturation level of the secondary back-iron. In this pa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2021
ISSN: 2045-2322
DOI: 10.1038/s41598-021-83920-8