Compensation strategy to reduce geometry and mechanics mismatches in porous biomaterials built with Selective Laser Melting
نویسندگان
چکیده
منابع مشابه
In-Built Customised Mechanical Failure of 316L Components Fabricated Using Selective Laser Melting
The layer-by-layer building methodology used within the powder bed process of Selective Laser Melting facilitates control over the degree of melting achieved at every layer. This control can be used to manipulate levels of porosity within each layer, effecting resultant mechanical properties. If specifically controlled, it has the potential to enable customisation of mechanical properties or de...
متن کاملModeling of selective laser sintering/selective laser melting
Selective laser sintering and selective laser melting are powder based additive manufacturing (AM) process that can rapidly manufacture parts with comparable mechanical properties to conventional manufacturing methods directly from digital files. However, the processing recipe development and design optimization of AM parts are often based on trial and error which erodes the benefit of AM. Mode...
متن کاملFabrication of Bioactive Porous Ti Metal with Structure Similar to Human Cancellous Bone by Selective Laser Melting
Porous titanium (Ti) metal with a structure similar to that of human cancellous bone was fabricated by selective laser melting (SLM) process. SEM observation showed that the core part of the walls of the porous body was completely melted by the laser beam and weakly bonded with small Ti particles on its surface. These Ti particles were joined with the core part by heating above 1000 °C, with re...
متن کاملRapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering.
Selective laser melting (SLM), a method used in the nuclear, space, and racing industries, allows the creation of customized titanium alloy scaffolds with highly defined external shape and internal structure using rapid prototyping as supporting external structures within which bone tissue can grow. Human osteoblasts were cultured on SLM-produced Ti6Al4V mesh scaffolds to demonstrate biocompati...
متن کاملGenerative ManufacturinG Methods: selective laser MeltinG
Since the late eighties generative manufacturing methods have been established as manufacturing systems for the product development in various sectors of industries. After only used for the production of demonstration models (Rapid Prototyping) is the rapid tooling and manufacturing now able to service a steady increasing range of applications. In order to achieve this status the range of usabl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Mechanical Behavior of Biomedical Materials
سال: 2017
ISSN: 1751-6161
DOI: 10.1016/j.jmbbm.2016.04.041