Compensation of Voltage Sags and Swells Using Dynamic Voltage Restorer Based on Bi-Directional H-Bridge AC/AC Converter

نویسندگان

چکیده

In this paper, the compensation of voltage sags and swells using a dynamic restorer (DVR) based on bi-directional AC/AC converter is presented for stabilizing single-phase AC line voltage. The H-bridge with switches without bulk capacitor adopted as power topology proposed system. novel DVR to compensate both sag swell conditions. Additionally, factor closed unity because not required. inner outer loop control improve response gain scaling; reduce overshoot. Finally, 2 kVA prototype has been implemented verify performance accuracy method peak efficiency system up 94%, it can 50% 25% sags.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mitigation of Voltage Sags/swells Using Dynamic Voltage Restorer (dvr)

This paper describes the effectiveness of using dynamic voltage restorer (DVR) in order to mitigate voltage sags and swells in low voltage distribution systems. A dynamic voltage restorer based on the dqo algorithm is discussed. The proposed control scheme is very effective to detect any disturbance in low voltage distribution systems. Simulation results using Matlab/Simulink are presented to v...

متن کامل

Mitigation Of Voltage Sags/Swells By Dynamic Voltage Restorer Using Pi And Fuzzy Logic Controller

Dynamic Voltage Restorer can provide the most cost effective solution to mitigate voltage sags and swells by establishing the proper voltage quality level that is required by customer. This device is connected in series with the distribution feeder at medium voltage. The PI controller is very common in the control of DVRs. However, one disadvantage of this conventional controller is the fact th...

متن کامل

Compensation of Sags and Swells Voltage Using Dynamic Voltage Restorer (dvr) during Single Line to Ground and Tree-phase Faults

This paper deals with modeling and simulation technique of a Dynamic Voltage Restore (DVR). The DVR is a dynamic solution to protect sensitive loads against voltage sags and swells. The DVR can be implemented to protect a group of medium voltage or low voltage consumers. The new configuration of DVR has been proposed using improved d-q-0 controller technique. This study presents compensation of...

متن کامل

Voltage Sags/Swells Mitigation Using a Dynamic Voltage Restorer Controlled by Neural Network

In this paper the effectiveness of a Dynamic Voltage Restorer controlled by neural network for voltage sags/swells mitigation is shown. A typical configuration of DVR is implemented by using MATLAB Simulink®, which is controlled using backpropagation neural networks. The good performance for voltage sags/swells mitigation of the DVR controlled with neural networks can be observed by means of se...

متن کامل

Design and Simulation of Dynamic voltage restorer ( DVR ) using SPWM and SVPWM Techniques for Voltage Sags & Voltage Swells Mitigation

This paper presents design and simulation of Dynamic voltage restorer(DVR) using sinusoidal pulse width modulation (SPWM) & space vector pulse width modulation(SVPWM). It describes the problems of voltage sags & swells and its severe impact on nonlinear loads (or) sensitive loads. DVR is a series connected device used for compensating the voltage sags & swells in distribution system. The detect...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Processes

سال: 2021

ISSN: ['2227-9717']

DOI: https://doi.org/10.3390/pr9091541