Compatibility of Coated Carbon Fibers to Aluminum.
نویسندگان
چکیده
منابع مشابه
Strength and surface characterization of aluminum-coated fused silica fibers
Hermetic aluminum-coated fused silica fibers can withstand high stress levels without failure for prolonged periods of time in water-containing environments. Aluminum-coated fibers from several sources exhibit differences in strength. The aluminum and silica surfaces have been examined using SEM and AFM in order to understand this variation. Differences in the interfacial interaction between al...
متن کاملInvestigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite
Radar absorbing materials, i.e. magnetite (Fe3O4) coated carbon fibers (MCCFs) were fabricated by electro-deposition technique. Black-colored single spinel phase Fe3O4 nanoparticles was easily synthesized by hydrothermal method using reduction of a Fe (III) - Triethanolamine complex in an aqueous alkaline solution at 60-80 ◦C. Uniform and compact Fe3O4 films were fabricated on nitric acid treat...
متن کاملSmart Cellulose Fibers Coated with Carbon Nanotube Networks
Smart multi-walled carbon nanotube (MWCNT)-coated cellulose fibers with a unique sensing ability were manufactured by a simple dip coating process. The formation of electrically-conducting MWCNT networks on cellulose monoand multi-filament fiber surfaces was confirmed by electrical resistance measurements and visualized by scanning electron microscopy. The interaction between MWCNT networks and...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملinvestigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite
radar absorbing materials, i.e. magnetite (fe3o4) coated carbon fibers (mccfs) were fabricated by electro-deposition technique. black-colored single spinel phase fe3o4 nanoparticles was easily synthesized by hydrothermal method using reduction of a fe (iii) - triethanolamine complex in an aqueous alkaline solution at 60-80 ◦c. uniform and compact fe3o4 films were fabricated on nitric acid treat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Composite Materials
سال: 1991
ISSN: 0385-2563
DOI: 10.6089/jscm.17.80