Comparing the deposition mechanisms in suspension plasma spray (SPS) and solution precursor plasma spray (SPPS) deposition of yttria-stabilised zirconia (YSZ)
نویسندگان
چکیده
منابع مشابه
Internal Nano Voids in Yttria-Stabilised Zirconia (YSZ) Powder
Porous yttria-stabilised zirconia ceramics have been gaining popularity throughout the years in various fields, such as energy, environment, medicine, etc. Although yttria-stabilised zirconia is a well-studied material, voided yttria-stabilised zirconia powder particles have not been demonstrated yet, and might play an important role in future technology developments. A sol-gel synthesis accomp...
متن کاملPlasma spray deposition of tri-layer environmental barrier coatings
n air plasma spray process has been used to deposit tri-layer environmental barrier coatings consisting of a silicon bond coat, a mullite interiffusion barrier, and a Yb2SiO5 top coat on SiC substrates. Solidified droplets in as-deposited Yb2SiO5 and mullite layers were discovered to be epleted in silicon. This led to the formation of an Yb2SiO5 + Yb2O3 two-phase top coat and 2:1 mullite (2Al2O...
متن کاملHydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method
In this work, hydroxyapatite/silica nanopowders were granulated to fabricate plasma sprayable feedstocks. For this purpose, the wet powders obtained by heating a hydroxyapatite/silica slurry were stirred and sieved. To realize the feedstock application in the plasma spray process, powders were deposited on titanium substrate. The morphology of granulated feedstock and sprayed coating was ...
متن کاملSuperhydrophobic Ceramic Coatings by Solution Precursor Plasma Spray
This work presents a novel coating technique to manufacture ceramic superhydrophobic coatings rapidly and economically. A rare earth oxide (REO) was selected as the coating material due to its hydrophobic nature, chemical inertness, high temperature stability, and good mechanical properties, and deposited on stainless steel substrates by solution precursor plasma spray (SPPS). The effects of va...
متن کاملModeling Spray Pyrolysis Deposition
The deposition of a thin tin oxide film allows for the manufacture of modern gas sensors. Spray pyrolysis deposition is used to grow the required thin films, as it can be seamlessly integrated into a standard CMOS processing sequence. A model for spray pyrolysis deposition is developed and implemented within the Level Set framework. Two models for the topography modification due to spray pyroly...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the European Ceramic Society
سال: 2014
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2014.05.024