Comparing partly and fully distributed control systems in a hydraulic mobile crane
نویسندگان
چکیده
منابع مشابه
Modeling and Analysis of Outrigger Reaction Forces of Hydraulic Mobile Crane (TECHNICAL NOTE)
This paper presents an original interactive analysis method consisting of mathematical calculation based on theoretical mechanics and mechanics of materials, and dynamics simulation for quantifying outrigger reaction forces of a kind of hydraulic mobile crane, aiming to avoid the eventualities during normal operation as far as possible, for example, tipping-over. First, a three dimensional dyna...
متن کاملIdentification and Control of a Hydraulic Forestry Crane
This article presents the identification and control of an electro-hydraulic crane. The crane is of the type used on forestry vehicles known as forwarders, which travel off-road collecting logs cut by the harvesters. The dynamics identified include significant frictional forces, dead zones, and structural and hydraulic vibrations. The control algorithm proposed, comprised of a linear controller...
متن کاملModelling and Control Design for a Hydraulic Forestry Crane
In the industry of forestry cranes, the design of automated machines that improve productivity has been a challenge for many researchers and engineers in the field of Control Systems and Robotics. An appropriate control design requires a detailed knowledge of the physical phenomena involved in the real system. At this point it is needed to perform simulation tests more rapid than experimental o...
متن کاملcoordination of protective schemes in distribution and subtransmission systems including distributed generation
نصب منابع پراکنده در سیستم های توزیع و فوق توزیع علاوه بر مزیت های فراوان، مشکلاتی را هم به همراه دارد. یکی از این مشکلات تأثیر این منابع روی اندازه جریان های اتصال کوتاه است. به طور معمول از حفاظت های مبتنی بر اصل جریان زیاد در سیستم های توزیع و فوق توزیع استفاده می شود. از مهمترین طرح های حفاظتی استفاده شده در فیدرهای توزیع، حفاظت فیوز- ریکلوزر است. همچنین از طرح های حفاظتی جریان زیاد جهتی در...
Flow versus pressure control of pumps in mobile hydraulic systems
This work studies an innovate working hydraulic system design for mobile applications, referred to as flow control. The fundamental difference compared to load sensing systems is that the pump is controlled based on the operator’s command signals rather than feedback signals from the loads. This control approach enables higher energy efficiency since the pressure difference between pump and loa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the JFPS International Symposium on Fluid Power
سال: 1993
ISSN: 2185-6303
DOI: 10.5739/isfp.1993.291