Comparative study of zirconia-mullite and alumina-zirconia composites
نویسندگان
چکیده
منابع مشابه
Elaboration of Alumina-Zirconia Composites: Role of the Zirconia Content on the Microstructure and Mechanical Properties
Alumina-zirconia (AZ) composites are attractive structural materials, which combine the high hardness and Young's modulus of the alumina matrix with additional toughening effects, due to the zirconia dispersion. In this study, AZ composites containing different amounts of zirconia (in the range 5-20 vol %) were prepared by a wet chemical method, consisting on the surface coating of alumina powd...
متن کاملDetection of tetragonal zirconia in alumina–zirconia powders by thermoluminescence
The thermoluminescence (TL) after excitation by UV or X-rays radiation of alumina-zirconia powders is investigated. The composites present five of the characteristic peaks of zirconia at −170, −145, −90, 0 and 95 °C. After a thermal treatment of mixed oxides, a new peak is observed at −35 °C in TL. This peak reveals the presence of stabilized tetragonal zirconia in the material. Moreover by com...
متن کاملCrack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses.
Mono-phase bio-ceramics (alumina and zirconia) are widely used as femoral heads in total hip replacements (THR) as an alternative to metal devices. Unfortunately, the orthopaedic community reports significant in-vivo failures. Material scientists are already familiar with composites like alumina zirconia. Since both are biocompatible, this could prove to be a new approach to implants. This pape...
متن کاملThe Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite
Alumina-Mullite-Zirconia ceramic composites were prepared by reaction sintering of alumina, zircon mixture and the sintering aids of magnesia and titania at temperatures of 1400 and 1600 C for 2 hours. The development of different phases and microstructures of the composites were analysed to assess the relative influence of the additives on the formation of alumina-zirconia-mullite compos...
متن کاملComparison of the effect of chromium oxide and magnesium oxide on the mechanical properties and microstructure of alumina-mullite-zirconia composites
Alumina-mullite-zirconia composites were prepared by the reaction sintering method between alumina and zircon powders and the effect of two additives (chromium oxide and manganese oxide)were investigated on their properties. 2 and 4 wt% of each oxide were added to the raw material composition and after pressing, the samples were sintered at 1630°C. The results showed that chromium oxide decreas...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 1999
ISSN: 0250-4707,0973-7669
DOI: 10.1007/bf02745674